AIR-SAP2602E-A-K9

Product Code

AIR-SAP2602E-A-K9

RAM

256 MB

Wireless Type

802.11G, 802.11n

Brand Name

Cisco

Item model number

AIR-SAP2602E-A-K9

Item Weight

2.5 pounds

Product Dimensions

8.7 x 8.7 x 2.1 inches

Item Dimensions L x W x H

8.7 x 8.7 x 2.13 inches

Flash Memory Size

32

①

Dual-band antenna connector A

②

Dual-band antenna connector B

③

Dual-band antenna connector C

④

Dual-band antenna connector D

Software

Cisco Unified Wireless Network Software Release 7.2.110 or later.

Supported Wireless LAN Controllers

●  Cisco 2500 Series, Cisco Wireless LAN Controller Module (WLCM) on Cisco Services Ready Engine (SRE) for Integrated Services Router Generation 2 (ISR G2), Cisco Wireless Services Module 2 (WiSM2), Cisco 5500 Series, Cisco Flex 7500 Series

802.11n Version 2.0 (and Related) Capabilities

●  3x4 multiple-input multiple-output (MIMO) with three spatial streams

●  Maximal ratio combining (MRC)

●  802.11n and 802.11a/g beamforming

●  20- and 40-MHz channels

●  PHY data rates up to 450 Mbps (40-MHz with 5 GHz)

●  Packet aggregation: Aggregated MAC Protocol Data Unit (A-MPDU) (Tx/Rx), Aggregated MAC Protocol Service Unit (A-MSDU) (Tx/Rx)

●  802.11 dynamic frequency selection (DFS)

●  Cyclic shift diversity (CSD) support

Data Rates Supported

802.11a: 6, 9, 12, 18, 24, 36, 48, and 54 Mbps

802.11bg: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps

Maximum Number of Nonoverlapping Channels

2.4 GHz

●  802.11b/g:

◦    20 MHz: 3

●  802.11n:

◦    20 MHz: 3

5 GHz

●  802.11a:

◦    20 MHz: 21

●  802.11n:

◦    20 MHz: 21

◦    40 MHz: 9

Note: This varies by regulatory domain. Refer to the product documentation for specific details for each regulatory domain.

Maximum Transmit Power

2.4 GHz

●  802.11b

◦    22 dBm: 3 Antennas

●  802.11g

◦    22 dBm: 3 Antennas

●  802.11n (HT20)

◦    22 dBm: 3 Antennas

5 GHz

●  802.11a

◦    23 dBm: 4 Antennas

●  802.11n (HT20)

◦    23 dBm: 4 Antennas

●  802.11n (HT40)

◦    23 dBm: 4 Antennas

Note: The maximum power setting will vary by channel and according to individual country regulations. Refer to the product documentation for specific details.

Available Transmit Power Settings

2.4 GHz

●  22 dBm (160 mW)

●  19 dBm (80 mW)

●  16 dBm (40 mW)

●  13 dBm (20 mW)

●  10 dBm (10 mW)

●  7 dBm (5 mW)

●  4 dBm (2.5 mW)

5 GHz

●  23 dBm (200 mW)

●  20 dBm (100 mW)

●  17 dBm (50 mW)

●  14 dBm (25 mW)

●  11 dBm (12.5 mW)

●  8 dBm (6.25 mW)

●  5 dBm (3.13 mW)

Note: The maximum power setting will vary by channel and according to individual country regulations. Refer to the product documentation for specific details.

Integrated Antenna

●  2.4 GHz, Gain 4 dBi, internal omnidirectional, horizontal beamwidth 360°

●  5 GHz, Gain 4 dBi, internal omnidirectional, horizontal beamwidth 360°

External Antenna (Sold Separately)

●  Certified for use with antenna gains up to 6 dBi (2.4 GHz and 5 GHz)

●  Cisco offers the industry's broadest selection of 802.11n antennas delivering optimal coverage for a variety of deployment scenarios

Interfaces

●  10/100/1000BASE-T autosensing (RJ-45)

●  Management console port (RJ-45)

Indicators

●  Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors

Dimensions
(W x L x H)

●  Access point (without mounting bracket): 8.69x8.69x2.11in. (22.1x22.1x5.4)

Weight

●  2.3 lbs (1.04 kg) (2.7 lbs for external)

Environmental

Cisco Aironet 2600i

●  Nonoperating (storage) temperature: -22 to 158°F (-30 to 70°C)

●  Nonoperating (storage) Altitude Test 25˚C, 15,000 ft.

●  Operating temperature: 32 to 104°F (0 to 40°C)

●  Operating humidity: 10 to 90% percent (noncondensing)

●  Operating Altitude Test: 40˚C, 9843 ft.

Cisco Aironet 2600e

●  Nonoperating (storage) temperature: -22 to 158°F (-30 to 70°C)

●  Nonoperating (storage) Altitude Test: 25˚C, 15,000 ft.

●  Operating temperature: -4 to 131°F (-20 to 55°C)

●  Operating humidity: 10 to 90 % (noncondensing)

●  Operating Altitude Test: 40˚C, 9843 ft.

System Memory

●  256 MB DRAM

●  32 MB flash

Input Power Requirements

●  AP2600: 44 to 57 VDC

●  Power Supply and Power Injector: 100 to 240 VAC; 50 to 60 Hz

Powering Options

●  802.3af Ethernet Switch

●  Cisco AP2600 Power Injectors (AIR-PWRINJ4=)

●  Cisco AP2600 Local Power Supply (AIR-PWR-B=)

Power Draw

●  AP2600: 12.95W

Note: When deployed using Power over Ethernet (PoE), the power drawn from the power sourcing equipment will be higher by some amount depending on the length of the interconnecting cable. This additional power may be as high as 2.45W, bringing the total system power draw (access point + cabling) to 15.4W.

Warranty

Limited Lifetime Hardware Warranty