CAB-TA-JP Specifications
|
| AC-input type |
Wide-ranging input with power factor correction.
Note: Power factor correction is a standard feature on AC-input power supplies. Power factor correction reduces the reactive component in the source AC current, allowing higher power factors and lower harmonic current
components. |
| AC-input voltage |
Low-line (115 VAC nominal)—90VAC (min) to 140VAC (max)
High-line (230 VAC nominal)—180VAC (min) to 264VAC (max) |
| AC-input current |
17.6A at 100VAC (1500W output)
17.6A at 200 VAC (3000W output) |
| AC-input frequency |
50/60Hz nominal (47 to 63Hz full range) |
Branch circuit
requirement |
Each chassis power supply should have its own dedicated, fused-branch circuit:
• North America—20 A.
• International—Circuits sized to local and national codes.
• All AC power supply inputs are fully isolated.
• Source AC can be out of phase between multiple power supplies in the
same chassis, which means that PS1 can be operating from phase A and
PS2 can be operating from phase B.
• For high-line operation, the power supply operates with the line conductor wired to a source AC phase, and the Neutral conductor wired either to a Neutral, single-phase power system or to another source AC phase as long as the net input voltage is in the range of 180 to 264 VAC. |
| Power supply output |
• 90 to 140 VAC operation
• 12V output—1500W
• 180 to 264 VAC operation
• 12V output—3000W |
| Output holdup time |
20 ms minimum with 1800W output at high line input |
| kVA rating |
3000W maximum (total output power) |
| Heat dissipation |
683 BTU per hour |
| Weight |
2.98 lb (1.35 kg) |
Contact@huatenmax.com
+86 136 9226 0946
