ASR1013 Specification
|
|
Physical specifications
Note: Depth applies to chassis edge-to-edge dimension and does not include protrusions such as card handles, power-supply handles, and cable management brackets.
Refer to the applicable hardware installation guide for additional details.
|
Height: 22.8 in. (579.1 mm)
Width: 17.2 in. (437.4 mm)
Depth: 18.15 in. (461.0 mm)
Weight:
● 184.0 lb (83.46 kg) (with redundant AC power supply, SPA, route processor, SIP blank covers, two Cisco ASR 1000 Series 40-Gbps ESPs [ASR1000-ESP40] or ASR1000 Series 100-Gbps ESPs [ASR1000-ESP100] or ASR1000 Series 200-Gbps ESPs [ASR1000-ESP200], two Cisco ASR 1000 Series RP2s [ASR1000-RP2], six Cisco ASR 1000 Series 40-Gbps SIPs [ASR1000-SIP40], and no SPAs)
|
|
Default memory
|
8-GB DRAM RP2
8-GB DRAM RP3
|
|
Number of SIPs or Ethernet line cards supported
|
6
|
|
Shared port adapters
|
24 SPA slots
|
|
Ethernet port adapters
|
12 EPA slots
|
|
Cisco ASR 1000 Series ESP
|
2 ESP slots
|
|
Route processor
|
2 route-processor slots
|
|
Redundancy
|
Hardware: Yes
|
|
Built-in Gigabit Ethernet ports
|
0
|
|
Built-in 10 Gigabit Ethernet port
|
No
|
|
Network interface module
|
No
|
|
Cisco ASR 1000 Series
|
Cisco ASR 1013
|
|
ESP support
|
Cisco ASR 1000 Series 40-Gbps ESP (ASR1000-ESP40),
Cisco ASR 1000 Series 100-Gbps ESP (ASR1000-ESP100), and Cisco ASR 1000 Series 200-Gbps ESP (ASR1000-ESP200)
|
|
ESP bandwidth
|
40 to 200 Gbps
|
|
ESP memory
|
Cisco ASR 1000 Series 40-Gbps ESP (ASR1000-ESP40):
8-GB DRAM
Cisco ASR 1000 Series 100-Gbps ESP (ASR1000-ESP100): 16-GB DRAM
Cisco ASR 1000 Series 200-Gbps ESP (ASR1000-ESP200): 32-GB DRAM
|
|
SIPs and Ethernet line cards
|
Supports Cisco ASR 1000 Series 40-Gbps SIP Carrier Card (ASR1000-SIP40), Cisco ASR1000 Series MIP 100-Gbps Carrier Card (ASR1000-MIP100), and ASR 1000 Fixed Ethernet Line Card; two 10 GE + twenty 1 GE (ASR1000-2T+20X1GE) line cards; and six 10 GE line cards (ASR1000-6TGE)
|
|
Embedded hardware-based encryption
|
Yes: On Cisco ASR 1000 Series 40-Gbps ESP (ASR1000-ESP40) with up to 11-Gbps crypto support throughput, Cisco ASR 1000 Series 100-Gbps ESP (ASR1000-ESP100) with up to 29-Gbps crypto support throughput, and Cisco ASR 1000 Series 200-Gbps ESP (ASR1000-ESP200) with up to 78-Gbps crypto support throughput
|
|
Minimum Cisco IOS XE Software release
|
Cisco ASR 1000 Series 40-Gbps ESP (ASR1000-ESP40) requires Cisco IOS XE Software Release 3.1.0S, ASR 1000 Series 100-Gbps ESP (ASR1000-ESP100) requires Cisco IOS XE Software Release 3.7.0S, and ASR 1000 Series 200-Gbps ESP (ASR1000-ESP200) requires Cisco IOS XE Software Release 3.10.0S
|
|
Rack-mounting
|
Yes: 19-inch
|
|
Wall-mounting
|
No
|
|
External USB flash memory
|
1-GB USB flash-memory support
|
|
Redundant power supply
|
Yes: Quad power supplies (redundant pairs) by default; option of either AC or DC power supplies
Note: A mix of AC and DC power supplies is not supported.
|
|
Power input
|
Worldwide ranging AC (180 to 264V; 240V; 60 or 50 Hz nominal)
Worldwide ranging DC
(-40.5 to
-72; -48V nominal)
|
|
Power consumption
|
● Maximum (DC): 4200W
● Maximum (AC-high line): 4000W
● Maximum (out): 3390W
|
|
Airflow
|
Front-to-back
|
|
Operating temperature (nominal)
|
Same as for Cisco ASR 1001-X
|
|
Operating temperature (short-term)
|
Same as for Cisco ASR 1001-X
|
|
Operating humidity (nominal) (relative humidity)
|
Same as for Cisco ASR 1001-X
|
|
Operating humidity (short-term)
|
Same as for Cisco ASR 1002
|
|
Storage temperature
|
Same as for Cisco ASR 1001-X
|
|
Storage humidity (relative humidity)
|
Same as for Cisco ASR 1001-X
|
|
Operating altitude
|
Same as for Cisco ASR 1001-X
|
|
Network Equipment Building Standards (NEBS)
|
GR-1089 and GR-63
|
|
EMC standards
|
Same as for Cisco ASR 1001-X
|
|
Safety Standard
|
|
Contact@huatenmax.com
+86 136 9226 0946
