A9K-24X10GE-SE Specification
|
|
Part Number
|
A9K-24X10GE-SE
|
|
Product Description
|
Cisco ASR 9000 24-Port 10GE Service Edge Optimized Line Card, requires SFP+ optics
|
|
Chassis compatibility
|
Compatible with the Cisco ASR 9000 Series 22-slot, 10-slot, and 6-slot chassis
|
|
Port density
|
24 ports of 10 Gigabit Ethernet per line card
|
|
Ethernet
|
● 10-Gbps IEEE 802.3 compliant
● 10 Gigabit Ethernet PHY monitoring
● IEEE 802.x flow control
● Full-duplex operation
● Per-port byte and packet counters for policy drops; oversubscription drops; cyclic redundancy check (CRC) error drops; packet sizes; and unicast, multicast, and broadcast packets
|
|
Performance
|
● 10-Gbps line-rate throughput per port
|
|
Options
|
Each line card is available as either a Service Edge Optimized (enhanced QoS) or Packet Transport Optimized (basic QoS) line card
|
|
Reliability and availability
|
Line card online insertion and removal (OIR) support without system impact
|
|
Physical dimensions (H x W x D); weight
|
14 x 1.72 x 20.5 in.; 14 lb (35.56 x 4.37 x 52.07 cm; 6.35 kg)
|
|
Network Equipment Building Standards (NEBS)
|
Cisco ASR 9000 Series Routers are designed to meet:
● SR-3580: NEBS Criteria Levels (Level 3)
● GR-1089-CORE: NEBS EMC and Safety
● GR-63-CORE: NEBS Physical Protection
|
|
Operating temperature (nominal)
|
41 to 104ºF (5 to 40ºC)
|
|
Operating temperature (short-term)
|
23 to 131ºF (–5 to 55ºC)
Note: Short-term refers to a period of not more than 96 consecutive hours and a total of not more than 15 days in 1 year (total of 360 hours in any given year, but no more than 15 occurrences during that 1-year period).
|
|
Operating humidity (nominal) (relative humidity)
|
10 to 85%
|
|
Storage temperature
|
-40 to 158ºF (-40 to 70ºC)
|
|
Storage (relative humidity)
|
5 to 95%
Note: Not to exceed 0.024 kg of water per kg of dry air
|
|
Operating altitude
|
-60 to 4000m (up to 2000m conforms to IEC, EN, UL, and CSA 60950 requirements)
|
|
ETSI standards
|
Cisco ASR 9000 Series Routers are designed to meet:
● EN300 386: Telecommunications Network Equipment (EMC)
● ETSI 300 019 Storage Class 1.1
● ETSI 300 019 Transportation Class 2.3
● ETSI 300 019 Stationary Use Class 3.1
● EN55022: Information Technology Equipment (Emissions)
● EN55024: Information Technology Equipment (Immunity)
● EN50082-1/EN-61000-6-1: Generic Immunity Standard
|
|
EMC standards
|
Cisco ASR 9000 Series Routers are designed to meet:
● FCC Class A
● ICES 003 Class A
● AS/NZS 3548 Class A
● CISPR 22 (EN55022) Class A
● VCCI Class A
● BSMI Class A
● IEC/EN 61000-3-2: Power Line Harmonics
● IEC/EN 61000-3-3: Voltage Fluctuations and Flicker
|
|
Immunity
|
Cisco ASR 9000 Series Routers are designed to meet:
● IEC/EN-61000-4-2: Electrostatic Discharge Immunity (8kV Contact, 15kV Air)
● IEC/EN-61000-4-3: Radiated Immunity (10V/m)
● IEC/EN-61000-4-4: Electrical Fast Transient Immunity (2kV Power, 1kV Signal)
● IEC/EN-61000-4-5: Surge AC Port (4kV CM, 2kV DM)
● IEC/EN-61000-4-5: Signal Ports (1kV)
● IEC/EN-61000-4-5: Surge DC Port (1kV)
● IEC/EN-61000-4-6: Immunity to Conducted Disturbances (10Vrms)
● IEC/EN-61000-4-8: Power Frequency Magnetic Field Immunity (30A/m)
● IEC/EN-61000-4-11: Voltage DIPS, Short Interruptions, and Voltage Variations
|
|
Safety
|
Cisco ASR 9000 Series Routers are designed to meet:
● UL/CSA/IEC/EN 60950-1
● IEC/EN 60825 Laser Safety
● ACA TS001
● AS/NZS 60950
● FDA – Code of Federal Regulations Laser Safety
|
Contact@huatenmax.com
+86 136 9226 0946
