|
Chassis compatibility
|
Compatible with the Cisco ASR 9006, ASR 9010, ASR 9904, ASR 9906, ASR 9910, ASR 9912, and ASR 9922 chassis
|
|
Port density
|
2 Terabit Line Card: 15 QSFP28 ports capable of 10Gb, 40Gb, and 100Gb Ethernet traffic support. 5 QSFP-DD ports capable of 10Gb, 40Gb, 100Gb, 200Gb, and 400Gb Ethernet traffic support.
0.8 Terabit Line Card: 6 QSFP28 ports capable of 10Gb, 40Gb, and 100Gb Ethernet traffic support. 2 QSFP-DD ports capable of 10Gb, 40Gb, 100Gb, 200Gb, and 400Gb Ethernet traffic support.
|
|
Ethernet
|
● 100-Gbps IEEE 802.3ba compliant
● 100 Gigabit Ethernet PHY monitoring
● 400-Gbos IEEE 802.3bs compliant
● IEEE 802.x flow control
● Full-duplex operation
● Per-port byte and packet counters for policy drops; oversubscription drops; Cyclic Redundancy Check (CRC) error drops; packet sizes; and unicast, multicast, and broadcast packets
|
|
Performance
|
● 100-Gbps line-rate throughput per QSFP28 port
● 400-Gbps line-rate throughput per QSFP-DD port
|
|
Options
|
Each line card is available as either a service-edge-optimized or packet-transport-optimized line card
|
|
Reliability and availability
|
Line card Online Insertion and Removal (OIR) support without system impact
|
|
Physical dimensions(includes ejector bracket/lever); (H x W x D); weight
|
2T Service Edge Combo Line Card - 5th Generation: 1.63 x 15.58 x 23.80 in.; 24.15 lb (41.4 x 395.7 x 604.5 mm; 10.95 kg)
|
|
Operating temperature
|
41 to 104°F (5 to 40°C)
Note: Limitations may apply when using high-power optics
|
|
Operating humidity (nominal) (relative humidity)
|
10 to 85%
|
|
Storage temperature
|
–40 to 158°F (–40 to 70°C)
|
|
Storage (relative humidity)
|
5 to 95%
Note: Not to exceed 0.024 kg of water per kg of dry air
|
|
Operating altitude
|
–60 to 4000 m (up to 2000 m conforms to IEC, EN, UL, and CSA 60950 requirements)
|
|
ETSI/EN standards
|
Cisco ASR 9000 Series Routers are designed to meet:
● EN300 386: Telecommunications Network Equipment (EMC)
● ETSI 300 019 Storage Class 1.1
● ETSI 300 019 Transportation Class 2.3
● ETSI 300 019 Stationary Use Class 3.1
● EN55022: Information Technology Equipment (Emissions)
● EN55032: Multimedia Equipment (Emissions)
● EN55024: Information Technology Equipment (Immunity)
● EN55035: Multimedia Equipment (Immunity)
● EN50082-1/EN-61000-6-1: Generic Immunity Standard
|
|
EMC standards
|
Cisco ASR 9000 Series Routers are designed to meet:
● FCC Class A
● ICES 003 Class A
● AS/NZS CISPR 32 Class A
● CISPR 22/CISPR 32 Class A
● EN55022/EN55032 Class A
● CCI Class A
● CNS-13438 Class A
● KN32 Class A
● IEC/EN 61000-3-2: Power Line Harmonics
● IEC/EN 61000-3-3: Voltage Fluctuations and Flicker
● EN50121-4 Railway applications Part 4: Emission and immunity of the signaling and telecommunications apparatus
● EN50121-3-2 Railway applications Part 3-2: Rolling stock - Apparatus
|
|
Immunity
|
Cisco ASR 9000 Series Routers are designed to meet:
● IEC/EN-61000-4-2: Electrostatic Discharge Immunity (8kV Contact, 15kV Air)
● IEC/EN-61000-4-3: Radiated Immunity (10V/m)
● IEC/EN-61000-4-4: Electrical Fast Transient Immunity (2kV Power, 1kV Signal)
● IEC/EN-61000-4-5: Surge AC Port (4kV CM, 2kV DM)
● IEC/EN-61000-4-5: Signal Ports (1kV)
● IEC/EN-61000-4-5: Surge DC Port (1kV)
● IEC/EN-61000-4-6: Immunity to Conducted Disturbances (10Vrms)
● IEC/EN-61000-4-8: Power Frequency Magnetic Field Immunity (30A/m)
● IEC/EN-61000-4-11: Voltage DIPS, Short Interruptions, and Voltage Variations
● KN35
|
|
Safety
|
Cisco ASR 9000 Series Routers are designed to meet:
● UL/CSA/IEC/EN 60950-1
● IEC/EN 60825 Laser Safety
● ACA TS001
● AS/NZS 60950
● FDA: Code of Federal Regulations Laser Safety
|
|
Network Equipment Building Systems (NEBS)
|
Designed to meet:
● SR-3580: NEBS Criteria Levels (Level 3)
● GR-1089-CORE: NEBS EMC and Safety
● GR-63-CORE: NEBS Physical Protection
|
Contact@huatenmax.com
+86 136 9226 0946
