Q9H64A

Model

Q9H64A

AP type

Indoor AP

IEEE

802.11ax

Antennas Type

Four (female) RP-SMA connectors for external dual band antennas (A0 through A3, corresponding with radio chains 0 through 3). Worst-case internal loss between radio interface and external antenna connectors

(due to duplexing circuitry): 1.3dB in 2.4GHz and 1.7dB in 5GHz.

Supported frequency bands (country-specific restrictions apply)

2.400 to 2.4835GHz

5.150 to 5.250GHz

5.250 to 5.350GHz

5.470 to 5.725GHz

5.725 to 5.850GHz

Model

Q9H64A

Q9H71A

AP type

Indoor AP

Indoor AP

IEEE

802.11ax

802.11ax

Antennas Type

Four (female) RP-SMA connectors for external dual band antennas (A0 through A3, corresponding with radio chains 0 through 3). Worst-case internal loss between radio interface and external antenna connectors

(due to duplexing circuitry): 1.3dB in 2.4GHz and 1.7dB in 5GHz.

Four integrated dual-band down-tilt omni-directional antennas for 4x4 MIMO with peak antenna gain of 4.2dBi in 2.4GHz and 7.5dBi in 5GHz. Built-in antennas are optimized for horizontal ceiling-mounted orientation of the AP. The down-tilt angle for maximum gain is roughly 30 degrees.

Combining the patterns of each of the antennas of the MIMO radios, the peak gain of the effective per-antenna pattern is 3.8dBi in 2.4GHz and 4.6dBi in 5GHz.

Supported frequency bands (country-specific restrictions apply)

2.400 to 2.4835GHz

5.150 to 5.250GHz

5.250 to 5.350GHz

5.470 to 5.725GHz

5.725 to 5.850GHz

2.400 to 2.4835GHz

5.150 to 5.250GHz

5.250 to 5.350GHz

5.470 to 5.725GHz

5.725 to 5.850GHz

Q9H64A Specification

AP type

Indoor AP

IEEE

802.11ax

Antennas Type

Four (female) RP-SMA connectors for external dual band antennas (A0 through A3, corresponding with radio chains 0 through 3). Worst-case internal loss between radio interface and external antenna connectors

(due to diplexing circuitry): 1.3dB in 2.4GHz and 1.7dB in 5GHz.

Supported frequency bands (country-specific restrictions apply)

2.400 to 2.4835GHz

5.150 to 5.250GHz

5.250 to 5.350GHz

5.470 to 5.725GHz

5.725 to 5.850GHz

Wi-fi Radio

5GHz radio:

- Four spatial stream Single User (SU) MIMO for up to  4.8Gbps wireless data rate to individual 4SS HE160 802.11ax client devices (max)

- Two spatial stream Single User (SU) MIMO for up to  1.2Gbps wireless data rate to individual 2SS HE80 802.11ax client devices (typical)

- Four spatial stream Multi User (MU) MIMO for up to 4.8Gbps wireless data rate to up to four 1SS or two 2SS HE160 802.11ax DL-MU-MIMO capable client devices simultaneously (max)

- Four spatial stream Multi User (MU) MIMO for up to 2.4Gbps wireless data rate to up to four 1SS or two 2SS HE80 802.11ax DL-MU-MIMO capable client devices simultaneously (typical)

2.4GHz radio:

- Two spatial stream Single User (SU) MIMO for up to 574Mbps wireless data rate to individual 2SS HE40 802.11ax client devices or to two 1SS HE40 802.11ax DL-MU-MIMO capable client devices simultaneously (max)

- Two spatial stream Single User (SU) MIMO for up to 287Mbps wireless data rate to individual 2SS HE20 802.11ax client devices or to two 1SS HE20 802.11ax DL-MU-MIMO capable client devices simultaneously (typical)

Supported data rates (Mbps)

- 802.11b: 1, 2, 5.5, 11

- 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54

- 802.11n (2.4GHz): 6.5 to 300 (MCS0 to MCS15, HT20 to HT40)

- 802.11n (5GHz): 6.5 to 600 (MCS0 to MVC31, HT20 to HT40)

- 802.11ac: 6.5 to 3,467 (MCS0 to MCS9, NSS = 1 to 4, VHT20 to VHT160)

- 802.11ax (2.4GHz): 3.6 to 574 (MCS0 to MCS11, NSS = 1 to 2, HE20 to HE40)

- 802.11ax (5GHz): 3.6 to 4,803 (MCS0 to MCS11, NSS = 1 to 4, HE20 to HE160)

Additional Interfaces

E0: HPE SmartRate port (RJ-45, maximum negotiated speed 2.5Gbps)

- Auto-sensing link speed (100/1000/2500BASE-T) and MDI/MDX

- 2.5Gbps speed complies with NBase-T and 802.3bz specifications

- POE-PD: 48Vdc (nominal) 802.3af/802.3at POE

E1: 10/100/1000BASE-T Ethernet network interface (RJ-45)

- Auto-sensing link speed and MDI/MDX

Link aggregation (LACP) support between both network ports for redundancy and increased capacity

DC power interface: 12Vdc (nominal, +/- 5%), accepts 2.1mm/5.5mm center-positive circular plug with 9.5mm length

USB 2.0 host interface (Type A connector)

- Capable of sourcing up to 1A / 5W to an attached device

Bluetooth 5 and Zigbee (802.15.4) radio

- Bluetooth: up to 8dBm transmit power (class 1) and -95dBm receive sensitivity

- Zigbee: up to 8dBm transmit power and -97dBm receive sensitivity

- Integrated vertically polarized omnidirectional antenna with roughly 30 degrees downtilt and peak gain of 3.5dBi (AP-515) or 4.9dBi (AP-514)

Visual indictors (two multi-color LEDs): for System and Radio status

Reset button: factory reset, LED mode control (normal/off)

Serial console interface (proprietary, micro-B USB physical jack)

Kensington security slot

Maximum (worst-case) power consumption

- DC powered: 16W

- POE powered (802.3af, IPM enabled): 13.5W

- POE powered (802.3at/bt): 20.8W

- All numbers above are without an external USB device connected. When sourcing the full 5W power budget to such a device, the incremental (worst-case) power consumption for the AP is up to 5.7W (PoE powered) or 5.5W (DC powered).

Operating conditions

- Temperature: 0°C to +50°C / +32°F to +122°F

- Humidity: 5% to 93% non-condensing

- AP is plenum rated for use in air-handling spaces

- ETS 300 019 class 3.2 environments

Storage and transportation conditions

- Temperature: -40°C to +70°C / -40F to +158°F

- Humidity: 5% to 93% non-condensing

- ETS 300 019 classes 1.2 and 2.3 environments