Position:Home / Products / Switches / HPE Switches / HPE Aruba Networking Switches
The Aruba 2930F Switch Series is designed for customer creating digital workplaces optimized for mobile users.
Figure 1 shows the appearance of JL693A.
Table 1 shows the Quick Specs.
Product Code |
|
Device Type |
Switch - 12 ports - L3 - managed - stackable |
Capacity |
Jumbo frame size: 9220 | IPv4 routing table entries: 2000 | IPv6 routing table entries: 1000 |
Processor |
1 x ARM Cortex-A9: 1.016 GHz |
RAM |
1 GB DDR3 SDRAM |
Voltage Required |
AC 120/230 V (50/60 Hz) |
Software Included |
Command Line Interface (CLI), HP Web browser, HP Intelligent Management Center |
Figure 2 shows the front panel of JL693A.
Figure 3 shows the back panel of JL693A.
JL693A provides these features:
High-Performance Access Layer Switches
Performance and Power at the Edge
Security and Quality of Service You Can Rely on
Simplify with Integrated Wired/Wireless Management
Table 2 shows the comparison of JL693A.
Module |
||
Device Type |
Switch - 12 ports - L3 - managed - stackable |
Switch - 48 ports - L3 - managed - stackable |
Capacity |
Jumbo frame size: 9220 | IPv4 routing table entries: 2000 | IPv6 routing table entries: 1000 |
Jumbo frame size: 9220 | IPv4 routing table entries: 10000 | IPv6 routing table entries: 5000 |
Processor |
1 x ARM Cortex-A9: 1.016 GHz |
1 x ARM Cortex-A9: 1.016 GHz |
RAM |
1 GB DDR3 SDRAM |
1 GB DDR3 SDRAM |
Voltage Required |
AC 120/230 V (50/60 Hz) |
AC 120/230 V (50/60 Hz) |
Software Included |
Command Line Interface (CLI), HP Web browser, HP Intelligent Management Center |
Command Line Interface (CLI), HP Web browser, HP Intelligent Management Center |
Do you have any question about the JL693A?
Contact us now via Live Chat or Contact@huatenmax.com.
JL693A Specification |
|
General |
|
Device Type |
Switch - 12 ports - L3 - managed - stackable |
Enclosure Type |
Rack-mountable 1U |
Subtype |
Gigabit Ethernet |
Ports |
12 x 10/100/1000 (PoE+) + 2 x 1 Gigabit / 10 Gigabit SFP+ (uplink) + 2 x 10/100/1000 |
Power Over Ethernet (PoE) |
PoE+ |
PoE Budget |
139 W |
Performance |
Throughput: 41.7 Mpps ¦ Switching capacity: 68 Gbps ¦ Latency (1 Gbps): 3.8 µs ¦ Latency (10 Gbps): 1.6 µs |
Capacity |
Jumbo frame size: 9220 ¦ IPv4 routing table entries: 2000 ¦ IPv6 routing table entries: 1000 |
MAC Address Table Size |
32K entries |
Routing Protocol |
OSPF, RIP, RIP-1, RIP-2, IGMPv2, IGMP, OSPFv2, static IP routing, IGMPv3, OSPFv3, static IPv4 routing, static IPv6 routing, RIPng, MLD, CIDR |
Remote Management Protocol |
SNMP 1, SNMP 2, RMON 1, SNMP, Telnet, SNMP 3, SSH, SSH-2, CLI, XRMON |
Encryption Algorithm |
MD5, SSL |
Authentication Method |
RADIUS, PAP, CHAP, TACACS, TACACS+ |
Compliant Standards |
IEEE 802.3, IEEE 802.3u, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.1v, IEEE 802.1ab (LLDP), IEEE 802.3at, IEEE 802.3az, IEEE 802.1AX |
Processor |
1 x ARM Cortex-A9: 1.016 GHz |
RAM |
1 GB DDR3 SDRAM |
Flash Memory |
4 GB |
Expansion / Connectivity |
|
Interfaces |
12 x 1000Base-T RJ-45 PoE+ ¦ 2 x Gigabit / 10Gbit LAN SFP+ ¦ 1 x serial (console) ¦ 2 x 1000Base-T RJ-45 |
Expansion Slots |
1 (total) / 1 (free) x expansion slot |
Installed Modules Qty (Max) |
0 (installed) / 2 (max) |
Power |
|
Power Device |
Internal power supply |
Installed Qty |
1 |
Voltage Required |
AC 120/230 V (50/60 Hz) |
Software / System Requirements |
|
Software Included |
Command Line Interface (CLI), HP Web browser, HP Intelligent Management Center |
Dimensions |
|
Width |
10 in |
Depth |
10 in |
Height |
1.7 in |
Environmental Parameters |
|
Min Operating Temperature |
32 °F |
Max Operating Temperature |
113 °F |
Humidity Range Operating |
15 - 95% (non-condensing) |
Min Storage Temperature |
-40 °F |
Max Storage Temperature |
158 °F |
Humidity Range Storage |
15 - 95% (non-condensing) |