Position:Home / Products / Switches / Huawei Switches / Huawei Data Center Switches
The Huawei CE5810-EI-B-B01 is a model within the CloudEngine 5800 Series, specifically designed for data centers needing efficient, high-performance networking solutions. This switch is a versatile option that includes 24 GE (Gigabit Ethernet) ports and four 10 GE SFP+ uplinks, enabling seamless connectivity and flexibility for various data-intensive applications.
Key features of the CE5810-EI-B-B01 include support for advanced routing protocols (e.g., RIP, OSPF, BGP) for high-performance, reliable network traffic handling and full compatibility with IPv6, making it suitable for future-proofing infrastructure. The model is also energy-efficient and includes fan modules with hot-swappable capabilities for ease of maintenance. Additionally, the switch supports features like MACsec encryption for enhanced security, Zero Touch Provisioning (ZTP) for quick deployment, and ACL for advanced traffic filtering.
This model is particularly suitable for enterprises focused on scalable networking infrastructure with manageable power consumption, and it is built to simplify network management within complex data center environments
Figure 1 shows the appearance of CE5810-EI-B-B01.
Table 1 shows the Quick Specs.
Product Code |
|
Part Number |
02350EYN |
Software Version |
V100R002C00 and later |
Base-T Ports |
24 |
SFP+ Ports |
4 |
QSFP+ Ports |
0 |
Switching Capacity |
128 Gbit/s |
Forwarding Rate |
96 Mpps |
Power module type |
2*AC Power Module |
Fan |
2*FAN Box |
Rated voltage range(with power module) |
100 V AC to 240 V AC, 50/60 Hz -48 V DC to -60 V DC |
Maximum power consumption |
68 W |
Fan type |
Pluggable fan module |
Airflow Design |
Front-to-back or back-to-front |
Typic Power(W) |
58 |
Dimensions (W x D x H) |
442 mm x 420 mm x 43.6 mm |
Weight (fully loaded) |
8 kg (17.6 lb) |
Figure 2 shows the CE5810-EI-B-B01 rear view (port side).
Note:
① |
Twenty-four 10/100/1000BASE-T Ethernet electrical ports |
② |
Four 10GE SFP+ Ethernet optical ports |
Figure 3 shows the CE5810-EI-B-B01 front view (power supply side).
Note:
① |
Power supply slot 1 |
② |
Fan slot 1 |
③ |
Console port |
④ |
ETH management port |
⑤ |
Bar code label |
⑥ |
USB port |
⑦ |
Fan slot 2 |
⑧ |
Power supply slot 2 |
Table 2 shows the recommended elements for the CE5810-EI-B-B01.
Model |
Description |
GE-SFP Optical Transceiver |
|
Optical Transceiver, eSFP, GE, Multi-mode Module(850nm, 0.55km, LC) |
|
Optical Transceiver, eSFP, GE, Single-mode Module(1310nm, 10km, LC) |
|
Optical Transceiver, eSFP, GE, Single-mode Module(1310nm, 40km, LC) |
|
Optical Transceiver, eSFP, GE, Single-mode Module(1550nm, 40km, LC) |
|
10G-SFP+ Optical Transceiver |
|
10GBase-USR Optical Transceiver, SFP+, 10G, Multi-mode Module(850nm, 0.1km, LC) |
|
Optical Transceiver, SFP+, 10G, Multi-mode Module(850nm, 0.3km, LC) |
|
Optical Transceiver, SFP+, 10G, Single-mode Module(1310nm, 10km, LC) |
|
GE Copper Transceiver |
|
Electrical Transceiver,SFP,GE,Electrical Interface Module(100m,RJ45) |
|
FAN-40SB |
|
Fan box(SB,Front to Back,FAN panel side intake) |
|
Fan box(SB,Back to Front,FAN panel side exhaust) |
Table 3 shows the comparison of CE5810-EI-B-B01 and CE5810-EI-B-B00.
Product Code |
||
Part Number |
02350EYN |
02350EYP |
Software Version |
V100R002C00 and later |
V100R002C00 and later |
Base-T Ports |
24 |
48 |
SFP+ Ports |
4 |
4 |
QSFP+ Ports |
0 |
0 |
Switching Capacity |
128 Gbit/s |
176 Gbit/s |
Forwarding Rate |
96 Mpps |
132 Mpps |
Power module type |
2*AC Power Module |
2*AC Power Module |
Maximum power consumption |
68 W |
92W |
Typic Power(W) |
58 |
80 |
Do you have any question about the CE5810-EI-B-B01?
Contact us now via Live Chat or Contact@huatenmax.com.
CE5810-EI-B-B01 Specification |
|
Base-T Ports |
24 |
SFP+ Ports |
4 |
QSFP+ Ports |
- |
Switching Capacity |
128 Gbit/s |
Forwarding Rates |
96 Mpps |
Airflow Design |
Front-to-back or back-to-front |
Device Virtualization |
iStack |
Super Virtual Fabric (SVF) |
|
Network Virtualization |
M-LAG |
TRILL (CE5855 & CE5850) |
|
VM Awareness |
Agile Controller |
SDN |
Open Programmability System (OPS) |
Traffic Analysis |
NetStream |
sFlow |
|
VLAN |
Adding access, trunk, and hybrid interfaces to VLANs |
Default VLAN |
|
QinQ |
|
MUX VLAN |
|
GVRP |
|
ACL |
ingress: 2.25k |
MAC Address Table |
maximum: 32k |
Dynamic learning and aging of MAC addresses |
|
Static, dynamic, and black hole MAC address entries |
|
Packet filtering based on source MAC addresses |
|
MAC address limiting based on ports and VLANs |
|
ARP (maximum) |
8k |
IPv4 FIB (maximum) |
12k |
IP Routing |
IPv4 routing protocols, such as RIP, OSPF, BGP, and IS-IS |
IPv6 routing protocols, such as RIPng, OSPFv3, IS-ISv6, and BGP4+ (not supported by CE5855) |
|
IPv6 FIB (maximum) |
6k |
IPv6 |
IPv6 Neighbor Discovery (ND) (not supported by CE5855) |
Path MTU Discovery (PMTU) (not supported by CE5855) |
|
TCP6, ping IPv6, tracert IPv6, socket IPv6, UDP6, and Raw IP6 |
|
Multicast FIB (maximum) |
8k |
Multicast |
IGMP, PIM-SM, PIM-DM, MSDP, and MBGP |
IGMP snooping |
|
IGMP proxy |
|
Fast leave of multicast member interfaces |
|
Multicast traffic suppression |
|
Multicast VLAN |
|
Reliability |
LACP |
STP, RSTP, VBST, MSTP |
|
BPDU protection, root protection, and loop protection |
|
Smart Link and multi-instance |
|
DLDP |
|
ERPS (G.8032) |
|
VRRP, VRRP load balancing, and BFD for VRRP |
|
BFD for BGP/IS-IS/OSPF/Static route |
|
QoS |
Traffic classification based on Layer 2 headers, Layer 3 protocols, Layer 4 protocols, and 802.1p priority |
Actions of ACL, CAR, re-marking, and scheduling |
|
Queue scheduling algorithms, including PQ, WRR, DRR, PQ + WRR, and PQ + DRR |
|
Congestion avoidance mechanisms, including WRED and tail drop |
|
Traffic shaping |
|
Configuration and Maintenance |
Console, Telnet, and SSH terminals |
Network management protocols, such as SNMPv1/v2c/v3 |
|
File upload and download through FTP and TFTP |
|
BootROM upgrade and remote upgrade |
|
802.3az Energy Efficient Ethernet (EEE) |
|
Hot patches |
|
User operation logs |
|
Zero-Touch Provisioning (ZTP) |
|
Security and Management |
802.1x authentication |
Command line authority control based on user levels, preventing unauthorized users from using commands |
|
DoS, ARP, and ICMP attack defenses |
|
Port isolation, port security, and sticky MAC |
|
Binding of the IP address, MAC address, interface number, and VLAN ID |
|
Authentication methods, including AAA, RADIUS, and HWTACACS |
|
Remote Network Monitoring (RMON) |
|
Dimensions (W x D x H) |
442 mm x 420 mm x 43.6 mm |
Weight (fully loaded) |
8 kg (17.6 lb) |
Environmental Parameters |
Operating temperature: 0°C to 40°C (32°F to 104°F) (0m to 1,800m) |
Storage temperature: -40°C to 70°C (-40°F to 158°F) |
|
Relative humidity: 5% to 95%, non-condensing |
|
Operating Voltage |
AC: 90V to 290V |
DC: -38.4V to -72V |
|
Maximum Power Consumption |
68W |