CE5810-48T4S-EI

Product Code

CE5810-48T4S-EI

Software Version

V100R002C00 and later

Fixed GE interfaces

48*10/100/1000BASE-T

Fixed 10GE interfaces

4*10GE SFP+

Fixed 40GE interfaces

None

Fixed 100GE interfaces

None

Base-T Ports

?48

SFP+ Ports

4

QSFP+ Ports

0

Switching Capacity

176 Gbit/s

Forwarding Rate

132 Mpps

Power module type

Pluggable AC or DC power module, 1+1 backup supported

Rated voltage range

100 V AC to 240 V AC, 50/60 Hz

-48 V DC to -60 V DC

Maximum power consumption

92W

Airflow

Front-to-back or back-to-front, depending on the fan modules and power modules used in the chassis

Dimensions (W x D x H)

442 mm x 420 mm x 43.6 mm

Weight (fully loaded)

8.2 kg (18.1 lb)

①

Forty-eight 10/100/1000BASE-T Ethernet electrical ports

②

Four 10GE SFP+ Ethernet optical ports

①

Power supply slot 1

②

Fan slot 1

③

Console port

④

ETH management port

⑤

Bar code label

⑥

USB port

⑦

Fan slot 2

⑧

Power supply slot 2

Model

Description

GE-SFP Optical Transceiver

eSFP-GE-SX-MM850

Optical Transceiver, eSFP, GE, Multi-mode Module(850nm, 0.55km, LC)

SFP-GE-LX-SM1310

Optical Transceiver, eSFP, GE, Single-mode Module(1310nm, 10km, LC)

S-SFP-GE-LH40-SM1310

Optical Transceiver, eSFP, GE, Single-mode Module(1310nm, 40km, LC)

S-SFP-GE-LH40-SM1550

Optical Transceiver, eSFP, GE, Single-mode Module(1550nm, 40km, LC)

10G-SFP+ Optical Transceiver

SFP-10G-USR

10GBase-USR Optical Transceiver, SFP+, 10G, Multi-mode Module(850nm, 0.1km, LC)

OMXD30000

Optical Transceiver, SFP+, 10G, Multi-mode Module(850nm, 0.3km, LC)

OSX010000

Optical Transceiver, SFP+, 10G, Single-mode Module(1310nm, 10km, LC)

GE Copper Transceiver

SFP-1000BaseT

Electrical Transceiver,SFP,GE,Electrical Interface Module(100m,RJ45)

FAN-40SB

FAN-40SB-F

Fan box(SB,Front to Back,FAN panel side intake)

FAN-40SB-B

Fan box(SB,Back to Front,FAN panel side exhaust)

Product Code

CE5810-48T4S-EI

CE5810-24T4S-EI

Software Version

V100R002C00 and later

V100R002C00 and later

Fixed GE interfaces

48*10/100/1000BASE-T

24*10/100/1000BASE-T

Fixed 10GE interfaces

4*10GE SFP+

4*10GE SFP+

Fixed 40GE interfaces

None

None

Fixed 100GE interfaces

None

None

Base-T Ports

?48

24

SFP+ Ports

4

4

QSFP+ Ports

0

0

Switching Capacity

176 Gbit/s

128 Gbit/s

Forwarding Rate

132 Mpps

96 Mpps

Power module type

Pluggable AC or DC power module, 1+1 backup supported

Pluggable AC or DC power module, 1+1 backup supported

Maximum power consumption

92W

68 W

CE5810-48T4S-EI Specification

Base-T Ports

 48

SFP+ Ports

 4

QSFP+ Ports

 -

Switching Capacity

176 Gbit/s

Forwarding Rates

132 Mpps

Airflow Design

Front-to-back or back-to-front

Device Virtualization

iStack 

Super Virtual Fabric (SVF) 

Network Virtualization

M-LAG

TRILL (CE5855 & CE5850)

VM Awareness

Agile Controller

SDN

Open Programmability System (OPS)

Traffic Analysis

NetStream

sFlow

VLAN

Adding access, trunk, and hybrid interfaces to VLANs

Default VLAN

QinQ

MUX VLAN

GVRP

ACL

ingress: 4.5k
egress: 1k

MAC Address Table

maximum: 32k

Dynamic learning and aging of MAC addresses

Static, dynamic, and black hole MAC address entries

Packet filtering based on source MAC addresses

MAC address limiting based on ports and VLANs

ARP (maximum)

8k

IPv4 FIB (maximum)

12k

IP Routing

IPv4 routing protocols, such as RIP, OSPF, BGP, and IS-IS

IPv6 routing protocols, such as RIPng, OSPFv3, IS-ISv6, and BGP4+ (not supported by CE5855)

IPv6 FIB (maximum)

6k

IPv6

IPv6 Neighbor Discovery (ND) (not supported by CE5855)

Path MTU Discovery (PMTU) (not supported by CE5855)

TCP6, ping IPv6, tracert IPv6, socket IPv6, UDP6, and Raw IP6

Multicast FIB (maximum)

8k

Multicast

IGMP, PIM-SM, PIM-DM, MSDP, and MBGP

IGMP snooping

IGMP proxy

Fast leave of multicast member interfaces

Multicast traffic suppression

Multicast VLAN

Reliability

LACP

STP, RSTP, VBST, MSTP

BPDU protection, root protection, and loop protection

Smart Link and multi-instance

DLDP

ERPS (G.8032)

VRRP, VRRP load balancing, and BFD for VRRP

BFD for BGP/IS-IS/OSPF/Static route

QoS

Traffic classification based on Layer 2 headers, Layer 3 protocols, Layer 4 protocols, and 802.1p priority

Actions of ACL, CAR, re-marking, and scheduling

Queue scheduling algorithms, including PQ, WRR, DRR, PQ + WRR, and PQ + DRR

Congestion avoidance mechanisms, including WRED and tail drop

Traffic shaping

Configuration and Maintenance

Console, Telnet, and SSH terminals

Network management protocols, such as SNMPv1/v2c/v3

File upload and download through FTP and TFTP

BootROM upgrade and remote upgrade

802.3az Energy Efficient Ethernet (EEE)

Hot patches

User operation logs

Zero-Touch Provisioning (ZTP)

Security and Management

802.1x authentication

Command line authority control based on user levels, preventing unauthorized users from using commands

DoS, ARP, and ICMP attack defenses

Port isolation, port security, and sticky MAC

Binding of the IP address, MAC address, interface number, and VLAN ID

Authentication methods, including AAA, RADIUS, and HWTACACS

Remote Network Monitoring (RMON)

Dimensions (W x D x H)

442 mm x 420 mm x 43.6 mm

Weight (fully loaded)

8.2 kg (18.1 lb)

Environmental Parameters

Operating temperature: 0°C to 40°C (32°F to 104°F) (0m to 1,800m)

Storage temperature: -40°C to 70°C (-40°F to 158°F)

Relative humidity: 5% to 95%, non-condensing

Operating Voltage

 AC: 90V to 290V

DC: -38.4V to -72V

Maximum Power Consumption

92W