AP6052DN Specification
|
|
Dimensions (H x W x D)
|
52 mm x 220 mm x 220 mm
|
|
Weight
|
1.66 kg
|
|
Interface type
|
GE port: 1 x 10/100/1000M self-adaptive Ethernet interface (RJ45)
5/2.5GE/PoE_IN port: 100M/1000M/2.5G/5G port that connects to the wired
Ethernet and supports PoE input.
1 x Management console port (RJ45)
1 x USB interface
|
|
Built-in Bluetooth
|
BLE4.1
|
|
LED indicator
|
Indicates the power-on, startup, running, alarm, and fault status of the system.
|
|
Power input
|
DC: 42.5 V to 57 V
PoE power supply: in compliance with IEEE 802.3at/bt
|
|
Maximum power consumption
|
DC/802.3bt power supply: 32 W (excluding the output power of the USB port)
802.3at power supply: 25.5 W (The USB function is unavailable. The port rate of 5/2.5GE/PoE_IN port decreases to 2.5 Gbit/s.)
NOTE
The actual maximum power consumption depends on local laws and regulations.
In 802.3at power supply mode, radio power is managed in self-adaptive mode.
|
|
Operating temperature
|
–10°C to +50°C
|
|
Storage temperature
|
–40°C to +70°C
|
|
Operating humidity
|
5% to 95% (non-condensing)
|
|
Dustproof and waterproof grade
|
IP41
|
|
Altitude
|
–60 m to +5000 m
|
|
Atmospheric pressure
|
53 kPa to 106 kPa
|
|
Antenna type
|
Built-in dual-band omnidirectional antennas
|
|
Antenna gain
|
2.4G/5G (switchable): 2 dBi/2.8 dBi
5G (non-switchable): 2.8 dBi
|
|
Maximum number of SSIDs for each radio
|
≤ 16
|
|
Maximum number of users
|
≤ 512
NOTE
The actual number of users varies according to the environment.
|
|
Maximum transmit power
|
2.4G/5G (switchable): 26 dBm/21 dBm (combined power)
5G (non-switchable): 24 dBm (combined power)
NOTE
The actual transmit power depends on local laws and regulations.
|
|
Power increment
|
1 dBm
|
|
Receiver sensitivity
|
2.4 GHz 802.11b: –104 dBm @ 1 Mbit/s; –95 dBm@ 11 Mbit/s
2.4 GHz 802.11g: -96 dBm @ 6 Mbit/s; -77 dBm @ 54 Mbit/s
2.4 GHz 802.11n (HT20): -95 dBm @ MCS0; -75 dBm @ MCS31
2.4 GHz 802.11n (HT40): -92 dBm @ MCS0; -73 dBm @ MCS31
5 GHz 802.11a: -95 dBm @ 6 Mbit/s; -79 dBm @ 54 Mbit/s
5 GHz 802.11n (HT20): -94 dBm @ MCS0; -74 dBm @ MCS31
5 GHz 802.11n (HT40): -93 dBm @ MCS0; -71 dBm @ MCS31
5 GHz 802.11ac (VHT20): -94 dBm @ MCS0NSS1; -70 dBm @ MCS8NSS4
5 GHz 802.11ac (VHT40): -91 dBm @ MCS0NSS1; -67 dBm @ MCS9NSS4
5 GHz 802.11ac (VHT80): -88 dBm @ MCS0NSS1; -62 dBm @ MCS9NSS4
5 GHz 802.11ac (VHT160): -85 dBm @ MCS0NSS1; -62 dBm @ MCS9NSS2
|
|
Safety standards
|
UL 60950-1
CAN/CSA 22.2 No.60950-1
IEC 60950-1
EN 60950-1
GB 4943
|
|
Radio standards
|
ETSI EN 300 328
ETSI EN 301 893
RSS-210
AS/NZS 4268
|
|
EMC standards
|
EN 301 489-1
EN 301 489-17
ETSI EN 60601-1-2
FCC Part 15
ICES-003
YD/T 1312.2-2004
ITU k.20
GB 9254
GB 17625.1
AS/NZS CISPR22
EN 55022
EN 55024
CISPR 22
CISPR 24
IEC61000-4-6
IEC61000-4-2
|
|
IEEE standards
|
IEEE 802.11a/b/g
IEEE 802.11n
IEEE 802.11ac
IEEE 802.11i
IEEE 802.11h
IEEE 802.11d
IEEE 802.11e
IEEE 802.11s
IEEE 802.11k
IEEE 802.11u
IEEE 802.11v
IEEE 802.11r
IEEE 802.11w
IEEE 802.11ae
IEEE 802.11aa
IEEE 802.11-2012 and select amendments(selected feature coverage)
IEEE 802.11-2016 and select amendments(selected feature coverage)
|
|
Security standards
|
802.11i, Wi-Fi Protected Access 2(WPA2), WPA
802.1X
Advanced Encryption Standards(AES), Temporal Key Integrity Protocol(TKIP)
EAP Type(s)
|
|
EMF
|
CENELEC EN 62311
CENELEC EN 50385
OET65
RSS-102
FCC Part1&2
FCC KDB series
|
|
RoHS
|
Directive 2002/95/EC & 2011/65/EU
|
|
REACH
|
Regulation 1907/2006/EC
|
|
WEEE
|
Directive 2002/96/EC & 2012/19/EU
|
Contact@huatenmax.com
+86 136 9226 0946
