The MA5611S is an outdoor small form factor-sealed unit (SFF-SU) multi-service access product launched by Huawei to support integrated broadband access.
The MA5611S is an integrated device that features small size and easy deployment.
The MA5611S is temperature-hardened and highly water-proof. Therefore, it can work normally in harsh outdoor environments.
Quick Specs
Table 1 shows the Quick Specs.
|
Product Code
|
MA5611S-AE08
|
|
Dimensions
|
RPF&Bypass Not Supported:330 mm x 230 mm x 130 mm (Height x Width x Depth)
RPF&PSTN Bypass:380 mm x 330 mm x 110 mm (Height x Width x Depth)
|
|
Ambient Temperature
|
-40C to +55C
|
|
Altitude
|
4000 m
|
Product Details
MA5611S-AE08 provide these highlights:
High-Speed Vectoring
The MA5611S supports vectoring, which is used to increase VDSL2 line rates. With this technology, users can access the Internet at a higher rate and experience more and better VDSL2 services.
Crosstalk cancellation in the downstream direction.
Crosstalk cancellation in the upstream direction.
Remote Power Supply
Supports remote power supply over twisted pairs, which resolves power obtaining issues in FTTB and FTTC scenarios.
The remote power supply is implemented as follows: The CO-end power supply module located in the CO increases the 48 V DC voltage to more than 200 V DC and transmits the power over twisted pairs for a specified distance (up to 10 km). The remote-end power supply module located in the remote site converts the voltage back to 48 V DC and supplies the MA5611S.
The MA5611S-AE08 supports built-in remote-end power supply modules.
Bypass
ADSL2+ and VDSL2 users connect to an MA5611S using the same bundle of cables. The MA5611S bypasses the ADSL2+ service when processing the VDSL service. In this way, the MA5611S transparently transmits the ADSL2+ data to the CO side.
IPv6
The IPv6 feature relieves IP address shortages and is simple to deploy, facilitating smooth service migration from IPv4 networks to IPv6 networks. In addition, IPv6 networks are compatible with IPv4 networks.
High Efficiency Maintenance and Management
Is plug and play and supports service pre-deployment.
Supports remote fault locating, troubleshooting, and batch upgrades.
Carrier-class Hardware Design
The optimal hardware design ensures reliable device running and smooth service provisioning.
The hardware design of the MA5611S complies with carrier-class reliability.
The MA5611S can operate at a wide temperature and pass through various environment adaptability, temperature, electromagnetic compatibility (EMC), and electrostatic discharge (ESD) tests.
The MA5611S supports a higher surge protection level.
Compare to Similar Items
Table 2shows the comparison of Huawei SmartAX MA561x Series.
|
Parameters
|
MA5611S-AE08
|
MA5611S-AE16
|
MA5611S-DE16
|
MA5611S-AE48
|
MA5611S-DE48
|
MA5611S-DE48-A
|
|
Dimensions
|
RPF&Bypass Not Supported:330 mm x 230 mm x 130 mm (Height x Width x Depth)
RPF&PSTN Bypass:380 mm x 330 mm x 110 mm (Height x Width x Depth)
|
AC:423 mm x 530 mm x 118 mm (Height x Width x Depth)
RPF:380 mm x 330 mm x 110 mm (Height x Width x Depth)
|
320 mm x 200 mm x 153 mm (Height x Width x Depth)
|
550 mm x 420 mm x 153 mm (Height x Width x Depth)
|
550 mm x 420 mm x 153 mm (Height x Width x Depth)
|
220 mm (cabinet) x 450 mm x 140 mm (Height x Width x Depth)
|
|
Ambient Temperature
|
-40C to +55C
|
-40C to +55C
|
-40C to +55C
|
-40C to +55C
|
-40C to +55C
|
-40C to +65C
|
|
Ambient Humidity
|
5% RH to 95% RH
|
5% RH to 95% RH
|
5% RH to 95% RH
|
5% RH to 95% RH
|
5% RH to 95% RH
|
5% RH to 95% RH
|
|
Atmospheric Pressure
|
70 kPa to 106 kPa
|
70 kPa to 106 kPa
|
70 kPa to 106 kPa
|
70 kPa to 106 kPa
|
70 kPa to 106 kPa
|
70 kPa to 106 kPa
|
|
Altitude
|
4000 m
|
4000 m
|
4000 m
|
4000 m
|
4000 m
|
4000 m
|
Get More Information
Do you have any question about the MA5611S-AE08
Contact us now via Live Chat or Contact@huatenmax.com.
Contact@huatenmax.com
+86 136 9226 0946
