S5310-52C-EI

Product Code

S5310-52C-EI

Maximum stack

bandwidth

(bidirectional)

160 Gbit/s

Stack ports

Four fixed 10GE SFP+ ports on the front panel or ports on the 2-port 10GE rear card

Mean time between

failures (MTBF)

45.57 years when a 8xGE optical interface card is configured; 44.85 years when a 8xGE electrical interface card is configured; 43.33 years when a 2x10GE interface card is configured

Memory

512 MB

Flash

200 MB

Available Version

V200R002C00 to V200R005C02

NOTE: These chassis models are not supported in V200R003C02 and V200R005C01.

Maximum system

power consumption

(100% throughput,

full speed of fans)

146.9 W

Dimensions (W x D x H)

442.0 mm x 420.0 mm x 43.6 mm When a 1150 W power module is installed, it extrudes out from the chassis. Therefore, the total depth of the switch changes to 507.3 mm

Weight

Fully loaded ≤ 10 kg

Empty ≤ 6 kg

①

Forty-eight 10/100/1000BASE-T Ethernet electrical ports

②

Four 10GE SFP+ Ethernet optical ports

Applicable modules and cables:

• ● GE optical module
• ● GE-CWDM optical module
• ● GE-DWDM optical module
• ● GE SFP copper module
• ● 10GE SFP+ optical module
• ● 10GE-CWDM optical module (applicable in V200R005C00 and later versions)
• ● 1 m, 3 m, 10 m SFP+ copper cables
• ● 3 m, 10 m AOC cables(applicable in V200R003C00 and later versions)

③

One ETH management port

④

One Mini USB port

⑤

One console port

⑥

One USB port

①

Ground screw

NOTE: It is used with a ground cable.

②

RCard slot 1

NOTE: For details about the mapping between cards and switches, see Cards.

③

Card slot 2

NOTE: For details about the mapping between cards and switches, see Cards.

④

Bar code label

NOTE: This label is drawable, and you can pull it outward to view the bar code and MAC address of the switch.

⑤

Power module slot 2

NOTE: Available power modules: l 150 W AC Power Module l 150 W DC Power Module

⑥

Power module slot 1

NOTE: Available power modules: l 150 W AC Power Module l 150 W DC Power Module

Model

Description

FE-SFP Optical Transceiver

SFP-FE-SX-MM1310

Optical Transceiver, SFP, 100M/155M, Multi-mode Module(1310nm, 2km, LC)

eSFP-FE-LX-SM1310

Optical Transceiver, eSFP, 100M/155M, Single-mode Module(1310nm, 15km, LC)

S-SFP-FE-LH40-SM1310

Optical Transceiver, eSFP, FE, Single-mode Module(1310nm, 40km, LC)

GE-SFP Optical Transceiver

eSFP-GE-SX-MM850

Optical Transceiver, eSFP, GE, Multi-mode Module(850nm, 0.55km, LC)

SFP-GE-LX-SM1310

Optical Transceiver, eSFP, GE, Single-mode Module(1310nm, 10km, LC)

S-SFP-GE-LH40-SM1310

Optical Transceiver, eSFP, GE, Single-mode Module(1310nm, 40km, LC)

S-SFP-GE-LH40-SM1550

Optical Transceiver, eSFP, GE, Single-mode Module(1550nm, 40km, LC)

10G-SFP+ Optical Transceiver

SFP-10G-USR

10GBase-USR Optical Transceiver, SFP+, 10G, Multi-mode Module(850nm, 0.1km, LC)

OMXD30000

Optical Transceiver, SFP+, 10G, Multi-mode Module(850nm, 0.3km, LC)

OSX010000

Optical Transceiver, SFP+, 10G, Single-mode Module(1310nm, 10km, LC)

GE Copper Transceiver

SFP-1000BaseT

Electrical Transceiver, SFP, GE, Electrical Interface Module(100m, RJ45)

Product Code

S5310-52C-EI

S5300-28X-LI-24S-AC

Mean time between

failures (MTBF)

45.57 years when a 8xGE optical interface card is configured; 44.85 years when a 8xGE electrical interface card is configured; 43.33 years when a 2x10GE interface card is configured

89.91 years

Memory

512 MB

256 MB

Flash

200 MB

200 MB

Power

consumption

146.9 W

<54W

Dimensions (W x D x H)

442.0 mm x 420.0 mm x 43.6 mm When a 1150 W power module is installed, it extrudes out from the chassis. Therefore, the total depth of the switch changes to 507.3 mm

442 mm x 220 mm x 43.6 mm

Weight

Fully loaded ≤ 10 kg

Empty ≤ 6 kg

≤ 5 kg

Memory (RAM)

512 MB

Flash

200 MB

Mean time between failures (MTBF)

45.57 years when an 8-port GE optical card is configured, 44.85 years when an 8-port GE electrical card is configured, 43.33 years when a 2-port 10GE interface card is configured

Mean time to repair (MTTR)

2 hours

Availability

> 0.99999

Service port surge protection

Common mode: ±2 kV

Power supply surge protection

Using AC power modules: ±6 kV in differential mode, ±6 kV in common mode

Using DC power modules: ±1 kV in differential mode, ±2 kV in common mode

Dimensions (W x D x H)

442.0 mm x 420.0 mm x 44.4 mm (17.4 in. x 16.5 in. x 1.75 in.)

Weight

Empty: ≤ 6 kg (13.23 lb)

Fully loaded: ≤ 10 kg (22.05 lb)

Stack ports

Four fixed 10GE SFP+ ports on the front panel or ports on the 2-port 10GE rear card

RPS

Not supported

PoE

Not supported

Rated voltage range

100 V AC to 240 V AC, 50/60 Hz

-48 V DC to -60 V DC

Maximum voltage range

90 V AC to 264 V AC, 47 Hz to 63 Hz

-36 V DC to -72 V DC

Maximum power consumption (100% throughput, full speed of fans)

146.9 W

Operating temperature

0°C to 50°C (32°F to 122°F) at an altitude of 0-1800 m (0-5096 ft.)

Storage temperature

-40°C to +70°C (-40°F to +158°F)

Noise under normal temperature (27°C, sound power)

< 53.9 dBA

Relative humidity

5% to 95%, noncondensing

Operating altitude

AC power modules configured: 0-5000 m (0-16404 ft.)

DC power modules configured: 0-2000 m (0-6562 ft.)

Certification

EMC certification

Safety certification

Manufacturing certification