Quick Quote ico
  • S5710-52C-PWR-EI-AC
  • S5710-52C-PWR-EI-AC

S5710-52C-PWR-EI-AC

Model:S5710-52C-PWR-EI-AC Huawei S5700 Series Switch
HuatenMax

Expertise Builds Trust

100+ Countries

6000+ Customers/Projects

CCIE, CISSP, JNCIE, NSE 7 AWS, Google Cloud Experts

Jim Huang

+86 136 9226 0946

Contact@huatenmax.com

Overview

Huawei S5710-52C-PWR-EI-AC is one of the S5700 Series Switches.S5700 Series Switches provide highly scalable gigabit access for terminals in enterprise campus networks; also ideal for resilient server support and aggregation in large-scale data centers.

Quick Specs

Figure 1 shows the appearance of S5710-52C-PWR-EI-AC.

S5710-52C-PWR-EI-AC Appearance

Table 1 shows the Quick Specs.

Product Code

S5710-52C-PWR-EI-AC

Extended Slots

two extended slots that support uplink sub-cards

Subcards supported

?2 x 10 GE SFP+ subcard, 8 x 10/100/1,000 BASE-T subcard, and 8 x 1,000 Base-X subcard

Switching Capacity

416 Gbit/s

Forwarding Performance

192 Mpps

Fixed Interfaces

48 x 10/100/1,000 Base-T ports, 4 x 10 GE SFP+ ports

PoE Available

PoE+

Power Supply

Double hot-swappable AC power supplies (A 580W AC power unit is included in S5710-52C-PWR-EI-AC model)

Memory (RAM)

512 MB

Flash

200 MB

Dimensions (W x D x H)

442.0 mm x 420.0 mm x 44.4 mm (17.4 in. x 16.5 in. x 1.75 in.)

Weight

Empty: ≤ 6 kg (13.23 lb)

Fully loaded: ≤ 10 kg (22.05 lb)

Product Details

Figure 2 shows the front panel of S5710-52C-PWR-EI-AC.

S5710-52C-PWR-EI-AC Front Panel

Note:

Forty-eight PoE+ 10/100/1000BASE-T ports

Four 10GE SFP+ ports

ETH management port

One mini USB port

One console port

One USB port

Figure 3 shows the back panel of S5710-52C-PWR-EI-AC.

S5710-52C-PWR-EI-AC Back Panel

Note:

Ground screw

Rear card slot 1

Rear card slot 2

ESN label

Power module slot 2

Power module slot 1

  • ● ·You can draw ESN label out to view the ESN and MAC address of the switch.

The Modules, Cards

Table 2 shows the recommended elements for the S5710-52C-PWR-EI-AC.

Model

Description

GE-SFP Optical Transceiver

eSFP-GE-SX-MM850

Optical Transceiver, eSFP, GE, Multi-mode Module(850nm, 0.55km, LC)

SFP-GE-LX-SM1310

Optical Transceiver, eSFP, GE, Single-mode Module(1310nm, 10km, LC)

S-SFP-GE-LH40-SM1310

Optical Transceiver, eSFP, GE, Single-mode Module(1310nm, 40km, LC)

S-SFP-GE-LH40-SM1550

Optical Transceiver, eSFP, GE, Single-mode Module(1550nm, 40km, LC)

10G-SFP+ Optical Transceiver

SFP-10G-USR

10GBase-USR Optical Transceiver, SFP+, 10G, Multi-mode Module(850nm, 0.1km, LC)

OMXD30000

Optical Transceiver, SFP+, 10G, Multi-mode Module(850nm, 0.3km, LC)

OSX010000

Optical Transceiver, SFP+, 10G, Single-mode Module(1310nm, 10km, LC)

GE Copper Transceiver

SFP-1000BaseT

Electrical Transceiver,SFP,GE,Electrical Interface Module(100m,RJ45)

10GE Interface Card

ES5D21X02S00

2 10 Gig SFP+ interface card (used in S5710EI series)

GE Interface Card

ES5D21G08T00

?

8 Ethernet 10/100/1000 ports interface card(used in S5710EI series)

ES5D21G08S00

8 Gig SFP interface card(used in S5710EI series)

Compare to Similar Items

Table 3 shows the comparison of S5710-52C-PWR-EI-AC and S5710-28C-PWR-EI-AC.

Product Code

S5710-52C-PWR-EI-AC

S5710-28C-PWR-EI-AC

Subcards supported

?2 x 10 GE SFP+ subcard, 8 x 10/100/1,000 BASE-T subcard, and 8 x 1,000 Base-X subcard

2 x 10 GE SFP+ subcard, 8 x 10/100/1,000 BASE-T subcard, and 8 x 1,000 Base-X subcard

Switching Capacity

416 Gbit/s

416 Gbit/s?

Forwarding Performance

192 Mpps

156 Mpps

Fixed Interfaces

48 x 10/100/1,000 Base-T ports, 4 x 10 GE SFP+ ports

24 Ethernet 10/100/1,000 ports, 4 of which are dual-purpose 10/100/1,000 or SFP, 4 x 10 Gig SFP+ ports

PoE Available

PoE+

PoE+

Get more information

Do you have any?question about?the?S5710-52C-PWR-EI-AC

Contact us now via Live Chat or Contact@huatenmax.com.

Specification

S5710-52C-PWR-EI-AC Specification

Fixed port

48 x 10/100/1000Base-T, 4 × 10GE SFP+

MAC address table

IEEE 802.1d compliance

MAC address learning and aging

Static, dynamic, and blackhole MAC address entries

Packet filtering based on source MAC addresses

VLAN

4K VLANs

Guest VLAN and voice VLAN

GVRP

MUX VLAN

VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports

1:1 and N:1 VLAN Mapping

Ring protection

RRPP ring topology and RRPP multi-instance

Smart Link tree topology and Smart Link multi-instance, providing the millisecond-level protection switchover

SEP

STP, RSTP, and MSTP

BPDU protection, root protection, and loop protection

BPDU Tunnel

Reliability

Ethernet OAM (IEEE 802.3ah and 802.1ag)

ITU-Y.1731

DLDP

LACP

MPLS features

MPLS L3VPN

MPLS L2VPN(VPWS/VPLS)

MPLS-TE

MPLS QoS

Notes: supported by S5710-EI, S5700-HI and S5710-HI

IP routing

Static routing

IPv6 features

Neighbor Discovery (ND)

Path MTU (PMTU)

IPv6 ping, IPv6 tracert, and IPv6 Telnet

ACLs based on the source IPv6 address, destination IPv6 address, Layer 4 ports, or protocol type

MLD v1/v2 snooping

Multicast

IGMP v1/v2/v3 snooping and IGMP fast leave

Multicast forwarding in a VLAN and multicast replication between VLANs

Multicast load balancing among member ports of a trunk

Controllable multicast

Port-based multicast traffic statistics

QoS/ACL

Rate limiting on packets sent and received by an interface

Packet redirection

Port-based traffic policing and two-rate three-color CAR

Eight queues on each port

WRR, DRR, SP, WRR+SP, and DRR+SP queue scheduling algorithms

WRED (supported by the S5710-EI and S5700-HI)

Re-marking of the 802.1p priority and DSCP priority

Packet filtering at Layers 2 through 4, filtering out invalid frames based on the source MAC address, destination MAC address, source IP address, destination IP address, TCP/UDP port number, protocol type, and VLAN ID

Rate limiting in each queue and traffic shaping on ports

Security

User privilege management and password protection

DoS attack defense, ARP attack defense, and ICMP attack defense

Binding of the IP address, MAC address, interface, and VLAN

Port isolation, port security, and sticky MAC

MFF

Blackhole MAC address entries

Limit on the number of learned MAC addresses

802.1x authentication and limit on the number of users on an interface

AAA authentication, RADIUS authentication, HWTACACS authentication, and NAC

SSH v2.0

Hypertext Transfer Protocol Secure (HTTPS)

CPU defense

Blacklist and whitelist

Access Security

DHCP Relay, DHCP Server, DHCP Snooping, DHCP Security

Management and maintenance

Virtual cable test

Port mirroring and RSPAN (remote port mirroring)

Remote configuration and maintenance using Telnet

SNMP v1/v2c/v3

RMON

Web NMS

HGMP

System logs and alarms of different levels

802.3az EEE (supported by the S5700(S)-LI, S5710-EI, S5700-HI and S5710-HI)

NetStream (supported by the S5710-EI, S5700-HI and S5710-HI)

Interoperability

Supports VBST (Compatible with PVST/PVST+/RPVST)

Supports LNP (Similar to DTP)

Supports VCMP (Similar to VTP)

Operating environment

Operating temperature: 0℃–50℃

Relative humidity: 10%–90% (non-condensing)

Input voltage

AC:

Rated voltage range: 100 V to 240 V AC, 50/60 Hz

Maximum voltage range: 90 V to 264 V AC, 47/63 Hz

DC:

Rated voltage range: –48 V to –60 V, DC

Maximum voltage range: –36 V to –72 V DC

Note: PoE-support switches do not use DC power supplies.

Dimensions (W x D x H)

442 x 420 x 43.6 mm

Powerconsumption

< 1043W with two 580W AC supplies(PoE:740W), or <1625W with two 1150W AC supplies(PoE:1440W)

Products Tags

Follow us and the future of network

Follow us, you will get the latest products and industry information in our insights emails.
Subscribe now also can get more than 50 valuable white papers. Learn Details>>>