Quick Quote ico
  • S5700-48TP-PWR-SI-AC
  • S5700-48TP-PWR-SI-AC

S5700-48TP-PWR-SI-AC

Model:S5700-48TP-PWR-SI-AC Huawei S5700 Series Switch
HuatenMax

Expertise Builds Trust

100+ Countries

6000+ Customers/Projects

CCIE, CISSP, JNCIE, NSE 7 AWS, Google Cloud Experts

Jim Huang

+86 136 9226 0946

Contact@huatenmax.com

Overview

The S5700-48TP-PWR-SI-AC is gigabit Layer 3 Ethernet switch based on new generation of high-performance hardware and Huawei Versatile Routing Platform (VRP). With 44 GE ports(10/100/1000Base-T) and 4 combo ports, it provides a large switching capacity, high-density GE interfaces for users, applicable to various scenarios. The ports also have the PoE feature to satisfy the demand of large power consumption. The S5700-48TP-PWR-SI-AC integrates many advanced technologies in terms of reliability, security, and energy conservation in order to help enterprise customers build a next-generation IT network.

Quick Specs

Figure 1 shows the appearance of Huawei S5700-48TP-PWR-SI-ACswitch.  S5700-48TP-PWR-SI-AC appearance

Table 1 shows the Quick Specs.

Product Code

S5700-48TP-PWR-SI-AC

Ports

44 × 10/100/1,000 Base-T ports

Extended Slots

one extended slot for a stack card

Memory (RAM)

256 MB

Flash

32 MB

MAC Address Table Size

16 MAC

Voltage Required

AC:

Rated voltage range: 100V to 240V, 50/60 Hz Maximum voltage range: 90V to 264V, 50/60 Hz

Power Device

AC power supplies

Power Consumption Operational

<917W (PoE: 740W)

Forwarding performance

72 Mpps

Switching capacity

256 Gbit/s 

Dimensions (W x D x H)

442 mm x 420 mm x 43.6 mm

Weight

8.3 kg

PoE

PoE+

Product Details

Figure 2 shows the front panel of HuaweiS5700-48TP-PWR-SI-ACswitch.  S5700-48TP-PWR-SI-AC front panel

Note:         

Forty-four PoE+ 10/100/1000BASE-T ports

Four combo ports

USB port

ETH management port

One console port

 

 

Figure 3 shows the back panel of HuaweiS5700-48TP-PWR-SI-ACswitch.  S5700-48TP-PWR-SI-AC back panel

Note:

ESD jack

Rear card slot

Fan slot

Power module slot 2

Power module slot 1

 

 

*Ventilating fan and power modules have been installed in the diagram, but they should be purchased alone.

*Before installing or maintaining a switch, wear an ESD wrist strap and insert the other end of the ESD wrist strap into this ESD jack.

Recommended Modules

Table 2 shows the recommended modules.

 

Model

Description

Power Module

W0PSA5000

500W AC Power Module(gray)

FE-SFP Optical Transceiver

SFP-FE-SX-MM1310

Optical Transceiver,SFP,100M/155M,Multi-mode Module(1310nm,2km,LC)

S-SFP-FE-LH40-SM1310

Optical Transceiver, eSFP, FE, Single-mode Module(1310nm,40km,LC)

eSFP-FE-LX-SM1310

Optical Transceiver,eSFP,100M/155M,Single-mode Module(1310nm,15km,LC)

GE-SFP Optical Transceiver

eSFP-GE-SX-MM850

Optical Transceiver, eSFP, GE, Multi-mode Module(850nm,0.55km,LC)

SFP-GE-LX-SM1310

Optical Transceiver, eSFP, GE, Single-mode Module(1310nm,10km,LC)

S-SFP-GE-LH40-SM1310

Optical Transceiver, eSFP, GE, Single-mode Module(1310nm,40km,LC)

S-SFP-GE-LH40-SM1550

Optical Transceiver, eSFP, GE, Single-mode Module(1550nm,40km,LC)

Compare with Similar Item       

Table 3 shows the comparison of HuaweiS5700-48TP-SI-AC,S5700-48TP-PWR-SI, and S5700-48TP-PWR-SI-AC .

Models

S5700-48TP-SI-AC

S5700-48TP-PWR-SI

S5700-48TP-PWR-SI-AC

Fixed Ports

48 × 10/100/1,000 Base-T ports

48 × 10/100/1,000 Base-T ports

48 × 10/100/1,000 Base-T ports

Power Supply

AC/DC

AC

AC

PoE

Not supported

Supported

Supported

Forwarding Performance

72 Mpps

72 Mpps

72 Mpps

Switching Capacity

256 Gbit/s 

256 Gbit/s 

256 Gbit/s 

Power Consumption

<64W

< 907W (PoE: 740W)

< 907W (PoE: 740W)

Get more information

Do you have any question about the Huawei S5700-48TP-PWR-SI-AC switch?

Contact us now via Live Chat or Contact@huatenmax.com.

Specification

S5700-48TP-PWR-SI-AC  Specification

MAC address table

IEEE 802.1d compliance

MAC address learning and aging

Static, dynamic, and blackhole MAC address entries

Packet filtering based on source MAC addresses

MAC address entries: 
S5700S-LI series: 8K, S5700-LI/S5700-SI series: 16K, S5700-EI series: 32K, S5720-EI series: 64K, S5700-HI series: S5700-HI: 32K, S5710-HI: 456K, S5720-HI: 128K

VLAN

4K VLANs

Guest VLAN and voice VLAN

GVRP

MUX VLAN

VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports

1:1 and N:1 VLAN Mapping

SuperVLAN(supported by the S5700-SI/S5700-EI/S5700-HI series)

Ring protection

RRPP ring topology and RRPP multi-instance

Smart Link tree topology and Smart Link multi-instance, providing the millisecond-level protection switchover

SEP

ERPS(G.8032)(supported by the S5700-LI/S5700-SI/S5700-EI/S5700-HI series)

STP, RSTP, and MSTP

BPDU protection, root protection, and loop protection

BPDU Tunnel

Reliability

Ethernet OAM (IEEE 802.3ah and 802.1ag)

ITU-Y.1731

DLDP

LACP

E-Trunk(supported by the S5700-SI/S5700-EI/S5700-HI series)

BFD for OSPF, BFD for IS-IS, BFD for VRRP, and BFD for PIM (supported by the S5700-EI/S5700-HI series)

MPLS features

MPLS L3VPN

MPLS L2VPN(VPWS/VPLS)

MPLS-TE

MPLS QoS

Notes: supported by S5710-EI, S5700-HI and S5710-HI

IP routing

Static routing

RIPv1, RIPv2 and RIPng,ECMP(supported by the S5700-SI/S5700-EI/S5700-HI series)

OSPF, OSPFv3, IS-IS, IS-ISv6, BGP and BGP4+ (supported by the S5700-EI/S5700-HI series)

IPv6 features

Neighbor Discovery (ND)

Path MTU (PMTU)

IPv6 ping, IPv6 tracert, and IPv6 Telnet

ACLs based on the source IPv6 address, destination IPv6 address, Layer 4 ports, or protocol type

MLD v1/v2 snooping

6to4 tunnel, ISATAP tunnel, and manually configured tunnel(supported by the S5700-SI/S5700-EI/S5700-HI series)

Multicast

IGMP v1/v2/v3 snooping and IGMP fast leave

Multicast forwarding in a VLAN and multicast replication between VLANs

Multicast load balancing among member ports of a trunk

Controllable multicast

Port-based multicast traffic statistics

IGMP v1/v2/v3, PIM-SM, PIM-DM, PIM-SSM, MSDP (supported by the S5700-EI/S5700-HI series)

QoS/ACL

Rate limiting on packets sent and received by an interface

Packet redirection

Port-based traffic policing and two-rate three-color CAR

Eight queues on each port

WRR, DRR, SP, WRR+SP, and DRR+SP queue scheduling algorithms

WRED (supported by the S5710-EI and S5700-HI)

Re-marking of the 802.1p priority and DSCP priority

Packet filtering at Layers 2 through 4, filtering out invalid frames based on the source MAC address, destination MAC address, source IP address, destination IP address, TCP/UDP port number, protocol type, and VLAN ID

Rate limiting in each queue and traffic shaping on ports

Security

User privilege management and password protection

DoS attack defense, ARP attack defense, and ICMP attack defense

Binding of the IP address, MAC address, interface, and VLAN

Port isolation, port security, and sticky MAC

MFF

Blackhole MAC address entries

Limit on the number of learned MAC addresses

802.1x authentication and limit on the number of users on an interface

AAA authentication, RADIUS authentication, HWTACACS authentication, and NAC

SSH v2.0

Hypertext Transfer Protocol Secure (HTTPS)

CPU defense

Blacklist and whitelist

Access Security

DHCP Relay, DHCP Server, DHCP Snooping, DHCP Security

Management and maintenance

Virtual cable test

Port mirroring and RSPAN (remote port mirroring)

Remote configuration and maintenance using Telnet

SNMP v1/v2c/v3

RMON

Web NMS

HGMP

System logs and alarms of different levels

802.3az EEE (supported by the S5700(S)-LI, S5710-EI, S5700-HI and S5710-HI)

Dying gasp (supported by the S5700-HI, S5710-HI and S5700(S)-LI(except battery LAN switches)

NetStream (supported by the S5710-EI, S5700-HI and S5710-HI)

sFlow(supported by the S5700(S)-LI/S5700-EI/S5700-HI series)

Interoperability

Supports VBST (Compatible with PVST/PVST+/RPVST)

Supports LNP (Similar to DTP)

Supports VCMP (Similar to VTP)

Operating environment

Operating temperature: 0℃–50℃

Relative humidity: 10%–90% (non-condensing)

Input voltage

AC:

-Rated voltage range: 100 V to 240 V AC, 50/60 Hz

-Maximum voltage range: 90 V to 264 V AC, 47/63 Hz

DC:

-Rated voltage range: –48 V to –60 V, DC

-Maximum voltage range: –36 V to –72 V DC

Note: PoE-support switches do not use DC power supplies.

Products Tags

Follow us and the future of network

Follow us, you will get the latest products and industry information in our insights emails.
Subscribe now also can get more than 50 valuable white papers. Learn Details>>>