Position:Home / Products / Switches / Huawei Switches / Huawei S5700 Series Switches
100+ Countries
6000+ Customers/Projects
CCIE, CISSP, JNCIE, NSE 7 AWS, Google Cloud Experts
Jim Huang
+86 136 9226 0946
Contact@huatenmax.com
Huawei S5700-52X-LI-AC is one of the S5700-LI Series Switches.The S5700-LI is a next-generation energy-saving gigabit Ethernet switch that provides flexible GE access ports and 10 GE uplink ports. Building on next-generation, high-performance hardware and the Huawei Versatile Routing Platform (VRP), the S5700-LI supports Advanced Hibernation Management (AHM), intelligent stack (iStack), flexible Ethernet networking, and diversified security control. It provides customers with a green, easy-to-manage, easy-to-expand, and cost-effective gigabit to the desktop solution. In addition, Huawei customizes specialized models to meet customer requirements to suit special scenarios. And the S5701-LI series with front power sockets can be installed in the 300 mm deep cabinet. They can be maintained through the front panel, saving space in small equipment rooms.
Figure 1 shows the appearance of S5700-52X-LI-AC.
Table 1 shows the Quick Specs.
Product Code |
|
Fixed Interfaces |
48 x 10/100/1,000 Base-T Ethernet ports, 4 x 10 GE SFP+ ports |
Power Supply |
AC power supply, supporting RPS |
Forwarding Performance |
132 Mpps |
Switching Capacity |
256 Gbit/s |
Operating Environment |
Long-term operating temperature: 0°C to 50°C Relative humidity: 5% to 95% (non-condensing) |
Power Socket Position |
rear power sockets |
Memory (RAM) |
256 MB |
Flash |
200 MB |
Dimensions (W x D x H) |
442.0 mm x 310.0 mm x 43.6 mm (17.4 in. x 12.2 in. x 1.72 in.) |
Weight |
≤ 5 kg (11.02 lb) |
Figure 2 shows the front panel of S5700-52X-LI-AC.
Note:
① |
Forty-eight 10/100/1000BASE-T ports |
② |
Four 10GE SFP+ ports |
③ |
One mini USB port |
④ |
One console port |
Figure 3 shows the back panel of S5700-52X-LI-AC.
Note:
① |
Ground screw |
② |
RPS socket |
③ |
Jack for AC terminal locking latch |
④ |
AC socket |
Table 2 shows the recommended elements for the S5700-52X-LI-AC.
Model |
Description |
GE-SFP Optical Transceiver |
|
Optical Transceiver, eSFP, GE, Multi-mode Module(850nm, 0.55km, LC) |
|
Optical Transceiver, eSFP, GE, Single-mode Module(1310nm, 10km, LC) |
|
Optical Transceiver, eSFP, GE, Single-mode Module(1310nm, 40km, LC) |
|
Optical Transceiver, eSFP, GE, Single-mode Module(1550nm, 40km, LC) |
|
10G-SFP+ Optical Transceiver |
|
10GBase-USR Optical Transceiver, SFP+, 10G, Multi-mode Module(850nm, 0.1km, LC) |
|
Optical Transceiver, SFP+, 10G, Multi-mode Module(850nm, 0.3km, LC) |
|
Optical Transceiver, SFP+, 10G, Single-mode Module(1310nm, 10km, LC) |
|
GE Copper Transceiver |
|
Electrical Transceiver,SFP,GE,Electrical Interface Module(100m,RJ45) |
Table 3 shows the comparison of S5700-52X-LI-AC, S5700-10P-PWR-LI-AC and S5700-28X-PWR-LI-AC.
Product Code |
|||
Fixed Interfaces |
48 x 10/100/1,000 Base-T Ethernet ports, 4 x 10 GE SFP+ ports |
8 x 10/100/1,000 Base-T Ethernet ports, 2 x GE SFP ports |
24 x 10/100/1,000 Base-T Ethernet ports, 4 x 10 GE SFP+ ports |
PoE Available |
No |
PoE+ |
PoE+ |
Forwarding Performance |
132 Mpps |
15 Mpps |
96 Mpps |
Switching Capacity |
256 Gbit/s |
256 Gbit/s |
256 Gbit/s |
Power Consumption |
< 61W |
< 142.4W (PoE: 124W) |
< 448.8W (PoE: 370W) |
Do you have any question about the S5700-52X-LI-AC?
Contact us now via Live Chat or Contact@huatenmax.com.
S5700-52X-LI-AC Specification |
|
Fixed Ports |
48 x 10/100/1,000 Base-T Ethernet ports, 4 x 10 GE SFP+ ports |
MAC Address Table |
16K MAC address entries MAC address learning and aging Static, dynamic, and blackhole MAC address entries Packet filtering based on source MAC addresses Interface-based MAC learning limiting |
VLAN Features |
4K VLANs Guest VLAN and voice VLAN GVRP MUX VLAN VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and interfaces 1:1 and N:1 VLAN mapping |
Jumbo frame |
10K |
Reliability |
RRPP ring topology and RRPP multi-instance Smart Link tree topology and Smart Link multi-instance, providing millisecond-level protection switchover SEP ERPS (G.8032) STP (IEEE 802.1d), RSTP (IEEE 802.1w), and MSTP (IEEE 802.1s) BPDU protection, root protection, and loop protection BPDU tunnel |
IP Routing |
Static route, RIP, RIPng (S5700-10P-LI-AC/S5700-10P-PWR-LI-AC do not support RIPng) |
IPv6 Features |
Neighbor Discovery (ND) Path MTU (PMTU) IPv6 ping, IPv6 tracert, and IPv6 Telnet ACLs based on the source IPv6 address, destination IPv6 address, Layer 4 ports, and protocol type MLD v1/v2 snooping |
Multicast |
IGMP v1/v2/v3 snooping and IGMP fast leave Multicast forwarding in a VLAN and multicast replication between VLANs Multicast load balancing among member ports of a trunk Controllable multicast Interface-based multicast traffic statistics |
QoS/ACL |
Rate limiting on packets sent and received by an interface Packet redirection Interface-based traffic policing and two-rate and three-color CAR Eight queues on each interface WRR, DRR, SP, WRR + SP, and DRR + SP queue scheduling algorithms Re-marking of the 802.1p priority and DSCP priority Packet filtering at Layer 2 to Layer 4, filtering out invalid frames based on the source MAC address, destination MAC address, source IP address, destination IP address, TCP/UDP port number, protocol type, and VLAN ID Rate limiting in each queue and traffic shaping on interfaces |
Security |
Hierarchical user management and password protection DoS attack defense, ARP attack defense, and ICMP attack defense Binding of the IP address, MAC address, interface number, and VLAN ID Port isolation, port security, and sticky MAC MFF Blackhole MAC address entries Limit on the number of learned MAC addresses IEEE 802.1x authentication and limit on the number of users on an interface AAA authentication, RADIUS authentication, HWTACACS+ authentication, and NAC SSH V2.0 Hypertext Transfer Protocol Secure (HTTPS) CPU defense Blacklist and whitelist |
Access Security |
DHCP relay, DHCP server, DHCP snooping, and DHCP security |
Lightning Protection |
Service interface: 6 kV |
Super Virtual Fabric (SVF) |
Working as an SVF client that is plug-and-play with zero configuration Automatically loading the system software package and patches of clients One-click and automatic delivery of service configurations Supports independent running client |
Management and Maintenance |
iStack Virtual Cable Test (VCT) Remote configuration and maintenance using Telnet SNMP v1/v2c/v3 RMON eSight and web-based NMS HTTPS LLDP/LLDP-MED System logs and multi-level alarms 802.3az EEE Dying Gasp Device hibernation mode |
Interoperability |
Supports VBST (Compatible with PVST/PVST+/RPVST) Supports LNP (Similar to DTP) Supports VCMP (Similar to VTP) |
Operating Environment |
Long-term operating temperature: 0°C to 50°C Relative humidity: 5% to 95% (non-condensing) |
Input Voltage |
AC: Rated voltage range: 100V to 240V, 50 Hz/60 Hz, Maximum voltage range: 90V to 264V, 47 Hz/63 Hz |
Power Socket Position |
rear power sockets |
Battery |
One slot for lead-acid battery charger module |
Dimensions (W x D x H) |
442 mm x 310 mm x 43.6 mm |
Power Consumption |
< 61W |