|
Software compatibility
|
● RoomOS 10.11 or later
● Microsoft Teams Rooms on Android
|
|
Default components of the Cisco Board Pro
|
● Fully integrated main unit is delivered with:
◦ Multi-touch 55- or 75-inch 4k LCD display
◦ 2 x 4k cameras – wide and main field of view
◦ 14 element second-generation microphone array
◦ Integrated speakers and woofer
● 2 active stylus pens
● Wall mount kit (when floor stand is selected, the wall mount kit is no longer included)
● Ethernet cable (16,4 feet/5 meters)
● Power cord according to country specified in order
● Lifting handle
|
|
Display
|
55-inch/75-inch LCD monitor
● Resolution: 4k UHD (3840x2160) /16:9)
● Display type: IPS LCD.
● Display size in inches: 55” or 75”
● Luminance: Typ 350 cd/m2
● Viewing angle: +/- 89 degrees (all directions)
● Number of colors: 1.07 billion (10bit)
● Contrast: 1:1000
● Response Time: 8ms
|
|
Optional hardware components
|
● Cisco Table Microphone Pro
● Cisco Table Microphone (3.5mm mini jack)
● Cisco Ceiling Microphone (3.5mm mini jack)
● Cisco Room Navigator
● Network, HDMI and presentation cables
● Cisco Active Optical USB-C Cable, 9m
● Wall stand, 55-inch version
● Wall stand, 75-inch version
● Floor stand, 55-inch version
● Floor stand, 75-inch version
● Wheel kit for floor stand, 55-inch version
● Wheel kit for floor stand, 75-inch version
● Cisco PTZ 4K Camera
|
|
User interface
|
● In-cell projected capacitive touch
● Optically bonded cover glass
● Multi-touch
● Active stylus-enabled
● Stylus-finger differentiation
|
|
Bandwidth
|
● Up to 20 Mbps bandwidth rate for video content
● 720p30 from 768 kbps
● 720p60 from 1152 kbps
● 1080p30 from 1472 kbps
● 1080p60 from 2560 kbps
|
|
Firewall traversal
|
● Cisco Expressway technology
● H.460.18, H.460.19 firewall traversal
|
|
Video standards
|
● H.264 AVC, H.265 HEVC, H.263
|
|
Supported resolution
|
● Screen: 4kp60
● Main video: Full HD 1080p30 and encoding 60 fps when a secondary camera is connected
● Main video in Webex meetings (when bandwidth is set at 20 Mbps): rendering up to 4x 1080p video streams decoding a total of 4K pixels
● Content sharing: 4kp15
|
|
Cameras
|
Dual 4k, 12MP cameras:
● Automatic best view and speaker tracking
● Automatic brightness and white balance
● 5x manual zoom
● 3x digital zoom via SpeakerTrack
● Frames camera mode support for equitable participant views
● Meeting zone support
Main camera:
● 85° horizontal field of view, 64° vertical field of view
● Dual f/1.7-f/2.4 aperture
● 12 MP image sensor, 30 fps
● Focus distance: 0.8m to infinity
● 1/2.3” CMOS, PDAF technology
Ultra-wide camera:
● 120° horizontal field of view, 90° vertical field of view
● f/2.0 aperture
● Fixed-focus
● 12 MP image sensor, 30 fps
● 1/2.3” CMOS
|
|
Video inputs
|
● USB-C DisplayPort Alternate Mode up to 3840 x 2160p60 (4kp60)
● HDMI 2.0 type A input supports formats up to 3840 x 2160p30 (4kp30)
● HDMI input is compatible with HDCP
|
|
Video outputs
|
● HDMI 2.0 type A up to 3840 x 2160p60 (4kp60) for screen mirroring, content and live video display
|
|
Wireless sharing
|
● Webex app (up to 3840 x 2160 at 7.5 fps)
● Cisco Intelligent Proximity client (up to 1920 x 1080 at 3 fps)
● Miracast (up to 1920 x 1080 at 60 fps) – Not available on Non radio version – requires Board Pro to be on Ethernet network connection
● Apple AirPlay:
◦ Bluetooth® discovery (not on non-radio version) and Bonjour service discovery
◦ Screen mirroring up to 1920 x 1080 at 60 fps
◦ Extended desktop (Mac only) - up to 1920 x 1080 at 60 fps
◦ Video streaming up to 3840 x 2160 at 30 fps
|
|
Network
|
● 1 x Ethernet (RJ-45) 100/1000 Mbps for LAN (external network)
● 1 x Ethernet (RJ-45) 100/1000 Mbps PoE (802.3af) port with a power budget of 15.4W enabled for Cisco Room Navigator and room peripherals, such as the Cisco PTZ 4K Camera
● Wi-Fi 802.11a/b/g/n/ac (2.4 and 5 GHz) - not available in non-radio versions
Note: Due to compliance regulations, it is required to enable 802.11d in the access point for the product to operate properly within 5725 MHz – 5875 MHz. A Wi-Fi connection can be used as a flexible option.
● IPv4 Dynamic Host Configuration Protocol (DHCP)/static
● IPv6 (both static and stateless address auto-configuration)
● Network Time Protocol (NTP)
● HTTP(S) proxy support (for signaling, not media)
● Inspecting TLS proxy supported
● Cisco Discovery Protocol (CDP)
● 802.1X network authentication (passphrase or X.509 client certificate)
● 802.1Q virtual LAN
● 802.1p (Quality of Service [QoS] and Class of Service [CoS])
|
|
Encode and decode
|
● Video stream: Full HD 1080p30
● Content stream: 4k 2160p15
● Up to 4k content decode from Webex
|
|
Sensors
|
● Presence detection powered by ultrasound technology embedded into the video device. Support for people count to track real-time occupancy and support space allocation
● General noise, ambient noise, and room acoustics (RT60) tracking with built-in sensors
● Environmental sensors measuring temperature, humidity, and air quality included in the Room Navigator control panel (please consult the Cisco Room Navigator datasheet for more information)
|
|
Companion mode
|
● In companion mode, one Cisco Room Series device and one Board Pro work together over IP as a combined system.
● Users can initiate meetings using the Room Series device and use the Board Pro for digital whiteboarding. Shared content is shown on both devices, and the whiteboards are shared to the room device automatically in video calls.
|
|
Audio standards
|
● G.711, G.722, G.722.1, G.729, AAC-LD, and Opus
|
|
Audio features
|
● Acoustic Echo Cancellation (AEC)
● Active Lip Synchronization
● AI-Powered Noise Removal
● Automatic Gain Control (AGC)
● Beamforming Microphones
● De-Reverberation
● Full Duplex
● Full-Band Audio
● Noise Reduction
● Spatial Audio
● Ultrasound Technology
● Test microphone feature available in the RoomOS device settings allows users to record a sound sample and play it back to test speech pickup quality and noise removal settings
|
|
Audio inputs
|
● 2 analog microphone inputs
● 1 HDMI input
● 1 USB-C
● 1 USB-A
● 1x Ethernet for audio over IP - connectivity with up to 3x Cisco Table Microphone Pro multi-directional conferencing microphones. Further microphone extension with AV integrator license*, providing support for up to 8x Cisco Microphone Pro units or up to 8x third-party digital microphone streams via AES67. Please note that connecting multiple IP microphones over Ethernet requires a PoE compatible switch, eg. CBS250, CBS350 and C1200.
● Bluetooth ® - Not available on Non Radio Version **
|
|
Audio outputs
|
● 1 analog line out (stereo 3.5mm minijack)
● 1 USB-C output
● 1 USB-A output
● 1x Ethernet for audio over IP & AES67 audio streams
● Bluetooth ® - Not available on Non Radio Version **
|
|
Microphone and loudspeaker system
|
● 14-element beamforming microphone array for crystal clear speech pickup and speaker tracking.
Note: The internal microphone array is optimized for up to 4 meters (13 ft) from the device in small and medium-sized meeting rooms and collaboration spaces. In meeting rooms where the furthest participants are seated more than 4 meters from the device, we recommend extending audio pickup by adding external table or ceiling microphones to ensure the best audio experience. Note that room acoustics and background noise level also impact the speech pickup distance and quality in the meeting space. Consult the Administration Guide and Cisco Project Workplace for guidance on best practices
● Multi-channel loudspeaker system with high-quality full-range drivers and separate force-cancelling woofers.
● Loudspeaker system frequency response: 75 Hz to 20 kHz [+/- 3dB].
● Max Output Sound Pressure Level: 94dB.
|
|
Speaker tracking
|
● Built-in microphone array for sophisticated speaker tracking.
● Best overview functionality auto-detects people in the room and frames them for the best group view. When someone starts to talk, the system uses audio triangulation to detect the active speaker and selects the best framing to show an optimized, prominent view of the speaker
● For an optimal speaker tracking experience for people joining remotely, it is recommended that the furthest in-room participant is located within less than 6 meters from the video device. Note that the best overview (automatic group framing) camera mode supports an extended distance from Board Pro.
|
|
Presenter tracking
|
● Requires connecting the Board Pro G2 with the Cisco PTZ 4K Camera or the Precision 60 Camera via Ethernet and HDMI
● Camera dynamically follows the local presenter within a defined zone and helps ensure an optimized view
● AI-powered face and upper-body detection capability
|
|
USB-C BYOD
|
Ability to provide the following over one USB-C cable to a connected computer:
● USB 2.0 type C
● Extension of display (3840x2160 @60fps) (computer must support Altmode Display Port)
● Touch forwarding capabilities on supported operating systems
● Use Cisco Board Pro camera, microphone, and speakers with any software client
● Laptop charging (60W maximum)
● Power output: 20V@3A (60W), 15V@3A (45W), 12V@3A (36W), 9V@3A (27W), 5V@3A (15W)
|
|
Video stream layouts
|
● Supporting available Webex video stream layouts and meeting features, including focus, grid, prominent, stack and overlay.
● Available in Webex meetings, People Focus provides an intelligent video layout option that removed excess floor and ceiling space, while optimizing the layout based on where people are sitting in the room, for a more equitable view of every participant in the meeting.
|
|
Language support
|
● Arabic, Czech, Danish, German, US English, UK English, Catalonian, Spanish, Latin-American Spanish, Finnish, French, Canadian French, Hebrew, Hungarian, Italian, Japanese, Korean, Dutch, Norwegian, Polish, Brazilian Portuguese, Portuguese, Russian, Swedish, Turkish, Ukrainian, Chinese (Simplified), Traditional Chinese.
|
|
System management
|
● For cloud deployments, the device is managed in the Control Hub, providing a single pane of glass of system status, activation, configuration, metrics, workspace insights, and troubleshooting.
● For on-premises deployments, management via Cisco Unified Communications Manager or Expressway supported
◦ Registration on Cisco Unified Communications Manager (CUCM) requires CUCM version 12.5(1) or later
◦ Native registration with Cisco Expressway (from version 10.5.2 or later with device pack)
◦ Webex
◦ Third-party H.323 Gatekeepers and standards-based SIP proxies.
|
|
Protocols
|
● H.323
● SIP
● Webex
● WebRTC
|
|
Embedded encryption
|
● H.323 and SIP point to point
● Standards-based: H.235 v3 and Advanced Encryption Standard (AES- 128 or 256)
● Automatic key generation and exchange
● Support for end-to-end encryption in Webex meetings and calls
|
|
IPv6 network support
|
● Single-call stack support for both H.323 and SIP
● Dual-stack IPv4 and IPv6 for DHCP, SSH, HTTP, HTTPS, DNS, DiffServ
● Support for both static and automatic IP configuration, stateless address auto configuration, and DHCPv6
|
|
Security features
|
● Secure management using HTTPS and SSH protocols
● End-to-end encryption for calls and meetings on Webex
● Standards-based media encryption on all back-ends (Secure Real-time Transport Protocol [SRTP], using AES-128-GCM or AES-256-GCM)
● WPA3 TM and WPA3-Enterprise with CCMP128 Wi-Fi ® security
● Password protection to access administration available on Room Navigator controller
● Network settings protection
|
|
Certificate management
|
● The device comes with a manufacturer installed certificate (MIC) signed by Cisco's manufacturing CA which can be used for Certificate Authority Proxy Function (CAPF) for secure onboarding to Cisco UCM
● Option for users to install certificates with matching private keys for services such as IEEE802.1x, wifi, HTTPS server and SIP-TLS
● Support for all regular certificate types and key sizes. The device comes with a pre-installed list of CAs (Certificate Authorities) that is vetted by Cisco and updated regularly. You can add or remove certificates from this list if desired. The CA list is used for outbound HTTPS and other TLS connections.
|
|
Power
|
● Electrical rating:
◦ Cisco Board Pro 55: 3.0-1.5 A 100-240 V 50/60 Hz, Class I
◦ Cisco Board Pro 75: 4.0-2.0 A 100-240 V 50/60 Hz, Class I
● Networked standby power: 8 W typical*
● Standby power: 1 W typical*
● Setting up Office Hours on the device allows to switch off features like signage outside of ordinary office hours, to optimize power consumption and extend screen lifetime. Outside office hours the device won’t wake up even if it detects motion in the room.
|
|
Operating, storage and transport temperature and humidity
|
● Operating temperature: 0°C to 35°C (32°F to 95°F) ambient temperature
● Operating humidity: 20% to 90% Relative Humidity (RH non- condensing)
● Storage and transportation temperature (-20C to +60C)
● Storage and transportation humidity (10% - 90% RH non-condensing)
|
|
Multipoint support
|
5-way embedded SIP/H.323 conferencing capability with MultiSite option
|
|
MultiSite features
|
● Adaptive SIP/H.323 MultiSite:
◦ 3-way resolution up to 1080 at 30 fps plus content up to 4K at 15 fps
◦ 4-way resolution up to 720 at 30 fps plus content up to 4K at 15 fps
◦ 5-way resolution up to 720 at 30 fps plus content up to 4K at 10 fps
● Full individual audio and video transcoding
● H.323, SIP, and VoIP in the same conference
● Support for presentation (H.239, BFCP) from any participant at resolutions up to 4Kp15
● Best impression (automatic continuous presence layouts)
● Encryption and dual stream from any situation
|
|
Approvals and regulatory compliance
|
● Directive 2014/30/EU (EMC Directive) - Class A - for the non-radio versions
● Directive 2014/53/EU (Radio Equipment Directive) - for the radio versions
● Directive 2014/35/EU (Low Voltage Directive) - for the non-radio versions
● Directive 2011/65/EU (RoHS)
● Directive 2012/19/EU (WEEE)
● NRTL approved (product safety)
● FCC listed (radio equipment)
● FCC CFR 47 Part 15B (EMC) - Class A
● FCC CFR 47 Part 15C (RF)
● FCC CFR 47 Part 15E (RF
|
|
Sustainability
|
● Circular design principles applied for product architecture, materials, and packaging
● Reduced amount of foam, single-use plastics and non-recyclable materials in the boxes
● Contains Post-Consumer Recycled (PCR) plastic in mechanical and cosmetic parts originating from end-of-life devices and old electronics
● The video system is manufactured with more sustainable, consciously chosen materials and is designed for easy repair, refurbishing, and recycling to extend the lifecycle of the product.
● Smart energy consumption and option to enable Office Hours to optimize energy usage and extend the lifecycle of the touch screen.
● Carbon Emission Insights widget in Control Hub allows to track and optimize the carbon footprint of your deployment
● Cisco’s takeback and reuse program enables you to return your end-of-use devices for free, via a simple, secure, and sustainable process.
|
Contact@huatenmax.com
+86 136 9226 0946
