BR-G730-48-64G-F Specification
|
| Fibre Channel ports |
128 ports (96 64G SFP+ ports, plus 16 2x64G SFP-DD ports), each supporting E_Ports, F_Ports, M_Ports, D_Ports, and EX_Ports.
48-port base configuration; additional ports are enabled with two 24-port SFP+ PODs (Ports on Demand), plus a 32-port SFP-DD POD (16 2x64G SFP-DD transceivers), scaling the switch from 48 ports to 128 ports. |
| Scalability |
Full-fabric architecture with a maximum of 239 switches |
| Certified maximum |
4K active nodes; 56 switches, 19 hops in Brocade Fabric OS fabrics. |
| Performance |
Fibre Channel: 8.5Gb/s line speed, full duplex; 10.53Gb/s line speed, full duplex; 14.025Gb/s line speed, full duplex; 28.05Gb/s line speed, full duplex; 57.8Gb/s line speed, full duplex; auto-sensing of 8, 10, 16, 32, and 64G port speeds. 10G optionally programmable to fixed-port speed. |
| ISL trunking |
Frame-based trunking with up to eight 64G SFP+ ports per ISL trunk; up to 512Gb/s per ISL trunk; up to two (4 x 32G) QSFP ports per ISL trunk. Exchange-based load balancing across ISLs with DPS included in Brocade Fabric OS. |
| Aggregate bandwidth |
8.192Tb/s |
| Maximum fabric latency |
Latency for locally switched ports is <780 ns (including FEC); compression is 1 μs per node. |
| Maximum frame size |
2,112-byte payload |
| Frame buffers |
2K per switching ASIC |
| Classes of service |
Class 2, Class 3, Class F (inter-switch frames) |
| Port types |
F_Port, E_Port, M_Port, D_Port (ClearLink Diagnostic Port) on 24 SFP+ ports
Brocade Access Gateway mode: F_Port and NPIV-enabled N_Port |
| Data traffic types |
Fabric switches supporting unicast |
| Size |
Width: 440.00 mm (17.32 in.)
Height: 86.7 mm (3.41 in.)
Depth: 609.6 mm (24.00 in.) |
| System weight |
18.92 kg (41.71 lb) with two power supplies, fans, without transceivers
21.80 kg (48.06 lb) with two power supplies, fans, fully populated with transceivers |
| Operating environment |
Temperature: 0°C to 40°C/32°F to 104°F
Humidity: 10% to 85% (non-condensing) |
| Non-operating environment |
Temperature: –25°C to 70°C/–13°F to 158°F
Humidity: 10% to 90% (non-condensing) |
| Operating altitude |
Up to 3,000 m (9,843 ft) |
| Storage altitude |
Up to 12 km (39,370 ft) |
| Power supply |
Dual, hot-swappable redundant power supplies with integrated system cooling fans. 80 Plus Gold |
| AC input |
100 to 240 VAC nominal, 90 to 264 VAC range, maximum input current 12A @ 100V or 5A @ 240V |
| Input line frequency |
50 Hz to 60 Hz nominal, 47 Hz to 63 Hz range. |
| Power consumption |
Maximum power draw:
• 969W with all 128 ports operating at 64G (96 ports populated with 64G SWL transceivers,
16 ports populated SFP-DD SWL transceivers, each providing two ports of 64G connectivity).
• 364W for an empty chassis with no transceivers.
Typical power draw:
• 515W for Brocade G730 switch with 64 64G SW optics modules under 50% traffic rate.
• 675W for Brocade G730 switch with 128 64G SW optics modules under 50% traffic rate. |
Contact@huatenmax.com
+86 136 9226 0946
