Quick Quote ico
  • IE-3010-24TC
  • IE-3010-24TC

IE-3010-24TC

Overview

IE-3010-24TC is the Cisco IE 3010 Switch, providing 24 10/100B-T, 2GE combo uplinks, no PSU included. Cisco Industrial Ethernet 3010 Series (IE 3010) is a family of rack-mount L2/L3 switches provide fiber SFP layer 3 aggregation and Power over Ethernet (PoE) configurations in the harsh industrial environment. It brings Cisco's leadership in switching to industrial Ethernet application with innovative features, robust security, and end-to-end Ethernet in the industrial network.

Quick Spec

Table 1 shows the quick spec.

Model

IE-3010-24TC

Ports

24 10/100BASETX ports and two dual-purpose Gigabit Ethernet uplink ports. (each dual-purpose uplink port has one 10/100/1000 Ethernet port and one SFP-based Gigabit Ethernet port, one port active)

Performance and scalability

• Wire-speed switching, 8 Gbps switching fabric

• Forwarding rate based on 64-byte packets: 6.5 Mpps

• 256 MB DDR2 SDRAM

• 1 GB SD Flash memory (128 MB enabled)

• Layer 2 LAN Base image supports 255 Vlans, 2000 MAC addresses, 256 IGMP groups.

• Layer 3 IP Services image supports 1000 Vlans, 3000 MAC addresses, 1000 IGMP groups, 3000 unicast routes

• Configurable maximum transmission unit (MTU) of up to 9000 bytes, with a maximum Ethernet frame size of 9018 bytes (jumbo frames) for bridging on Gigabit Ethernet ports, and up to 1998 bytes for bridging on both Fast Ethernet ports

Dimensions (H x W x D)

1.75 x 17.5 x 14.0 in. (4.45 x 44.5 x 35.6 cm), 1RU (rack unit) height

Weight

9.1 lb (4.1kg) (without power supply unit)

Product Details

Figure 1 shows the front view of this switch.

Cisco IE-3010-24TC Front

Note:

SD flash memory card slot

Power-input terminal

Dual purpose ports

Alarm port

RJ-45 console port

10/100 ports

USB (mini-Type B) console port

 

Figure 2 shows the rear view.

Cisco IE-3010 Back

Supported Products

Table 2 shows the accessories.

Model

Description

PWR-RGD-LOW-DC/IA

Low DC (24/48V) power supply module for the IE-3010 switch (available Q1 CY2011)

PWR-RGD-AC-DC/IA

High AC/DC (88-300VDC/85-264VAC) power supply module for the IE-3010 switch

SD-IE-1GB

Spare 1 GB SD flash memory card

CAB-CONSOLE-RJ45

Spare console cable 6 ft with RJ45 and DB9F

CAB-CONSOLE-USB

Spare console cable 6 ft with USB Type A and mini-B

GLC-SX-MM-RGD

Rugged Gigabit Ethernet SFP, LC connector, multimode fiber, 220-550 m

GLC-LX-SM-RGD

Rugged Gigabit Ethernet SFP, LC connector, single mode fiber, 550 m - 10 km

GLC-ZX-SM-RGD

Rugged Gigabit Ethernet SFP, LC connector, single mode fiber, 70 km

GLC-FE-100FX-RGD

Rugged Fast Ethernet SFP, LC connector, multimode fiber, 2 km

GLC-FE-100LX-RGD

Rugged Fast Ethernet SFP, LC connector, single mode fiber, 10 km

Compare to Similar Items

Table 3 shows the comparison.

Model

IE-3010-24TC

IE-3010-16S-8PC

Ports

24 10/100BASETX ports and two dual-purpose Gigabit Ethernet uplink ports. (each dual-purpose uplink port has one 10/100/1000 Ethernet port and one SFP-based Gigabit Ethernet port, one port active)

16 Fast Ethernet SFP ports, 8 10/100BASETX/PoE ports, and 2 dual-purpose Gigabit Ethernet uplink ports. (each dual-purpose uplink port has one 10/100/1000 Ethernet port and one SFP-based Gigabit Ethernet port, one port active)

Performance and scalability

• Wire-speed switching, 8 Gbps switching fabric

• Forwarding rate based on 64-byte packets: 6.5 Mpps

• 256 MB DDR2 SDRAM

• 1 GB SD Flash memory (128 MB enabled)

• Layer 2 LAN Base image supports 255 Vlans, 2000 MAC addresses, 256 IGMP groups.

• Layer 3 IP Services image supports 1000 Vlans, 3000 MAC addresses, 1000 IGMP groups, 3000 unicast routes

• Configurable maximum transmission unit (MTU) of up to 9000 bytes, with a maximum Ethernet frame size of 9018 bytes (jumbo frames) for bridging on Gigabit Ethernet ports, and up to 1998 bytes for bridging on both Fast Ethernet ports

• Wire-speed switching, 8 Gbps switching fabric

• Forwarding rate based on 64-byte packets: 6.5 Mpps

• 256 MB DDR2 SDRAM

• 1 GB SD Flash memory (128 MB enabled)

• Layer 2 LAN Base image supports 255 Vlans, 2000 MAC addresses, 256 IGMP groups.

• Layer 3 IP Services image supports 1000 Vlans, 3000 MAC addresses, 1000 IGMP groups, 3000 unicast routes

• Configurable maximum transmission unit (MTU) of up to 9000 bytes, with a maximum Ethernet frame size of 9018 bytes (jumbo frames) for bridging on Gigabit Ethernet ports, and up to 1998 bytes for bridging on both Fast Ethernet ports

Dimensions (H x W x D)

1.75 x 17.5 x 14.0 in. (4.45 x 44.5 x 35.6 cm), 1RU (rack unit) height

1.75 x 17.5 x 14.0 in. (4.45 x 44.5 x 35.6 cm), 1RU (rack unit) height

Weight

9.1 lb (4.1kg) (without power supply unit)

10 lb (4.5kg) (without power supply unit)

Ordering Guide

pdf  [PDF] Cisco Industrial Ethernet Switches Ordering Guide

pdf  [PDF] Simple Cisco Industrial Ethernet Switches (IE 4000, IE 2000 included) Selection Guides

Get More Information

Do you have any question about the IE-3010-24TC

Contact us now via Live Chat or Contact@huatenmax.com.

Specification

IE-3010-24TC Specification

Ports

24 10/100BASETX ports and two dual-purpose Gigabit Ethernet uplink ports. (each dual-purpose uplink port has one 10/100/1000 Ethernet port and one SFP-based Gigabit Ethernet port, one port active)

Performance and scalability

• Wire-speed switching, 8 Gbps switching fabric

• Forwarding rate based on 64-byte packets: 6.5 Mpps

• 256 MB DDR2 SDRAM

• 1 GB SD Flash memory (128 MB enabled)

• Layer 2 LAN Base image supports 255 Vlans, 2000 MAC addresses, 256 IGMP groups.

• Layer 3 IP Services image supports 1000 Vlans, 3000 MAC addresses, 1000 IGMP groups, 3000 unicast routes

• Configurable maximum transmission unit (MTU) of up to 9000 bytes, with a maximum Ethernet frame size of 9018 bytes (jumbo frames) for bridging on Gigabit Ethernet ports, and up to 1998 bytes for bridging on both Fast Ethernet ports

Dimensions (H x W x D)

1.75 x 17.5 x 14.0 in. (4.45 x 44.5 x 35.6 cm), 1RU (rack unit) height

Weight

9.1 lb (4.1kg) (without power supply unit)

Connectors and cabling

10/100 ports:

• 10/100BASE-TX ports: RJ-45 connectors, 2-pair Category 5 unshielded twisted pair (UTP) or shielded twisted pair (STP) cabling

• 100FX SFP ports (IE-3010-16S-8PC only):

• 100BASE-FX, -LX, -ZX, and -BX10: Duplex LC receptacle fiber connectors (multimode and single mode)

Gigabit ports:

• 10/100/1000BASE-T ports: RJ-45 connectors, 4-pair Category 5 UTP/STP cabling

• 1000BASE-SX, -LX/LH, -ZX, and -BX10: Duplex LC receptacle fiber connectors (multimode and single-mode fiber)

Console ports:

• Management console port: RJ45 connector for serial connection

• Management console port: USB mini type B connector for USB connection

Indicators

• Per-port status LEDs: Link integrity, port disabled, and activity indications

• System-status LED: System activity, system integrity,

• Alarm-in status LEDs: Four alarm inputs status indicator

• Alarm-out status LED: Alarm status indicator

• Power supply unit LED: Power output integrity and power supply presence

• PoE (IE-3010-16S-8PC only): PoE activity, PoE integrity, and PoE disabled

• SD Flash LED: SD flash integrity and SD flash presence

• RS232 LED: RS232 console selection

• USB LED: USB console selection

Environmental ranges

• -40 ºF to 140ºF (-40 to +60ºC) continuous operating temperature range

• -40 ºF to 185ºF (-40 to +85ºC) type test for 16 hours at 85ºC

• Operating altitude: 3000 m (9843 ft) at 40ºC (104ºF)

• Operating relative humidity: 5% to 95% noncondensing

Storage and transportation

• Temperature: -40 ºF to 185ºF (-40 to +85 ºC)

• Altitude: 15,000 ft (4570 m)

• Relative humidity: 5% to 95% noncondensing

Mean time between failure (MTBF)

• Cisco IE-3010-24TC: 207,731 hrs

• Cisco IE-3010-16S-8PC: 230,112 hrs

Warranty

Five years limited warranty

Products Tags
You may also be interested in the following products

Follow us and the future of network

Follow us, you will get the latest products and industry information in our insights emails.
Subscribe now also can get more than 50 valuable white papers. Learn Details>>>