|
CBW140AC-x Specifications
|
|
Authentication and security
|
● Wi-Fi Protected Access 2 (WPA2) WPA3 is coming in a post–Frame Check Sequence (FCS) release
● 802.1X, RADIUS Authentication, Authorization, and Accounting (AAA)
● Segmentation via VLANs (up to 16)
● 802.11r and 802.11i
● Guest network can also authenticate against: Google and Facebook
|
|
Maximum clients
|
● Maximum number of associated wireless clients: 200 per Wi-Fi radio, for a total of 400 clients per access point, or 1000 in a system
|
|
Maximum # of Access Points
|
● 50
● Recommended up to 25
|
|
Max # of Mesh Extenders
|
● Maximum number of associated Cisco Business mesh extenders: 25 per Access Point, up to 8 hops
|
|
802.11ac
|
● 2x2 single-user/multi-user MIMO with two spatial streams, up to 867 Mbps in 5GHz
● 20-, 40-, and 80-MHz channels
● Dynamic Frequency Selection (DFS)
|
|
Ethernet ports
|
● Authentication with 802.1X or MAC filtered
● Dynamic VLAN or per port
● Traffic locally switched or tunneled back to Master AP
|
|
Data rates supported
|
802.11a: 6, 9, 12, 18, 24, 36, 48, and 54 Mbps
|
|
802.11b/g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps
|
|
802.11n data rates on 2.4 GHz: 6.5 to 300 Mbps (MCS0-MCS15, HT 20/40)
|
|
802.11ac data rates on 5 GHz: 6.5 to 867 Mbps (MCS0-MCS9)
|
|
Note: This varies by regulatory domain. Refer to the product documentation for specific details for each regulatory domain.
|
|
Available transmit power settings
|
2.4 GHz
Up to 20 dBm
|
5 GHz
Up to 20 dBm
|
|
Note: The maximum power setting will vary by channel and according to individual country regulations. Refer to the product documentation for specific details.
|
|
Integrated antennas
|
● 2.4 GHz, gain 2 dBi
● 5 GHz, gain 4 dBi
|
|
Interfaces
|
● 1x Gigabit Ethernet (10/100/1000BASE-T autosensing), Power over Ethernet (PoE)
● RJ-45 console port (not functional)
|
|
Indicators
|
● Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors
|
|
Dimensions (W x L x H)
|
● Access point (without mounting bracket): 6 x 6 x 1.3 in. (150.8 x 150.8 x 33 mm)
|
|
Weight
|
● Access point without mounting bracket or any other accessories: 14 oz (400 g)
|
|
Environmental
|
● Operating
◦ Temperature: 32° to 104°F (0° to 50°C)
◦ Humidity: 10% to 90% (noncondensing)
◦ Maximum altitude: 9843 ft (3000 m) at 40°C
● Nonoperating (storage and transportation)
◦ Temperature: –22° to 158°F (-30° to 70°C)
◦ Humidity: 10% to 90% (noncondensing)
◦ Maximum altitude: 15,000 ft (4500 m) at 25°C
|
|
System
|
● 1 GB DRAM, 256 MB flash
● 710-MHz quad core processor
|
|
Powering options
|
● 802.3af/at Ethernet switch; a Cisco Business switch with PoE is recommended
● Optional Cisco Business PoE injector
|
|
Power draw
|
● 8.3W (maximum, on PoE)
|
|
Mounting and physical security
|
Included with the access point:
● Mounting bracket
● Torx security screw
● Ceiling rail mount clip
|
|
Warranty
|
Cisco Business limited lifetime hardware warranty
Free software updates, no service contract required
|
Contact@huatenmax.com
+86 136 9226 0946
