JG722A

Product Code

JG722A

Type

HP 850 Unified Wired-WLAN Appliance

I/O ports and slots

Additional ports and slots

Power supplies

Includes: 1 x JG745A (HP X351 150 W 100 - 240 V a to 12 V dc power supply)

Dimensions (W x D x H)

44 x 42 x 4.36 cm (17.32 x 16.54 x 1.72 in) (1U height)

Weight

5.6 kg (12.35 lb)

①

100/1000Base-T autosensing Ethernet ports 1 to 8

(combo interface)

②

100Base-FX/1000Base-X SFP ports 1 to 8

(combo interface)

③

10GBase-R SFP+ ports (9 to 10)

④

100/1000 Base-T management Ethernet ports

⑤

Console port

Product Code

JG722A

JG641A

Type

HP 850 Unified Wired-WLAN Appliance

HP 830 8-Port PoE+ Unified Wired-WLAN Switch

Ports

• ● 8 dual-personality ports; 8 RJ-45 autosensing 100/1000 ports (IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T) Duplex: 100BASE-TX: half or full; 1000BASE-T: full only Media type: Auto-MDIX SFP 100/1000 Mb/s ports (IEEE 802.3z Type 1000BASE-X, IEEE 802.3u Type 100BASE-FX)
• ● 2 SFP+ 10GbE ports

• ● 8 RJ-45 dual-personality 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Media Type: Auto-MDIX; Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only.
• ● 2 SFP 1000 Mbps ports.
• ● 1 RJ-45 serial console port.

JG722A Specifications

Type

HP 850 Unified Wired-WLAN Appliance

I/O ports and slots

· 8 dual-personality ports; 8 RJ-45 autosensing 100/1000 ports (IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T) Duplex: 100BASE-TX: half or full; 1000BASE-T: full only Media type: Auto-MDIX SFP 100/1000 Mb/s ports (IEEE 802.3z Type 1000BASE-X, IEEE 802.3u Type 100BASE-FX)

· 2 SFP+ 10GbE ports

Additional ports and slots

1 RJ-45 serial console port

1 RJ-45 out-of-band management port

Power supplies

2 power supply slots

1 minimum power supply required

Includes: 1 x JG745A (HP X351 150 W 100 - 240 V a to 12 V dc power supply)

Memory and processor (Processor)

Broadcom XLP432 Eight core @ 1.4 GHz, 4GB flash, 4GB DDR3 SDRAM

Mounting and enclosure

EIA-standard 19-inch telco rack or equipment cabinet (hardware included)

Features

Default supported APs: 64

Maximum supported APs: 512 (via the optional purchase of the 32 or 128 access point E-LTU) Maximum supported clients and centralized throughput:

10,000 clients

10G centralized throughput

Maximum supported users via local portal authentication: 2000

Maximum supported users via local authentication (AAA): 1,000

Maximum supported configured SSIDs: 512

Maximum supported ACLs: 32,000

Supported MSM APs are automatically discovered, Comware firmware is loaded, and the APs can be fully managed. AP upgrade license rules for redundant HP 850 Unified Wired-WLAN Appliance deployments

The primary HP 850 Unified Wired-WLAN Appliance’s AP count must be increased using the optional HP Unified Wired-WLAN 128 AP E-LTU (JG649AAE) or the HP Unified Wired-WLAN 32 AP E-LTU (JG774AAE).

The secondary HP 850 Unified Wired-WLAN Appliance’s AP count can be increased as needed using the reduced-cost HP Unified Wired-WLAN 128 AP Redundant E-LTU.

The AC Power supplies are hot-swappable.

Dimensions (W x D x H)

44 x 42 x 4.36 cm (17.32 x 16.54 x 1.72 in) (1U height)

Weight

5.6 kg (12.35 lb)

Maximum heat dissipation

576.03 kJ/hr (546 BTU/hr)

AC voltage

100 - 240 V ac

DC voltage

-48 to -60 V dc

Maximum power rating

150 W

Frequency

50/60 Hz

Operating temperature

0° to 45°C (32° to 113°F)

Operating relative humidity

5% to 95%, noncondensing

Nonoperating/storage temperature

-40° to 70°C (-40° to 158°F)

Nonoperating/storage relative humidity

5% to 95%, noncondensing

Altitude

Up to 5 km (16,404 ft)