JG723A

JG723A Specifications

Type

HPE 870 Unified Wired-WLAN Appliance

I/O ports and slots

• · 12 RJ-45 autosensing 100/1000 ports (IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Media Type: Auto-MDIX; Duplex: 100BASE-TX: half or full; 1000BASE-T: full only
• · 12 SFP 100/1000 Mb/s ports (IEEE 802.3z Type 1000BASE-X, IEEE 802.3u Type 100BASE-FX)
• · 4 SFP+ 10GbE ports (IEEE 802.3ae Type 10GBASE-ER, IEEE 802.3ae Type 10GBASE-LR, IEEE 802.3ae Type 10GBASE-SR, IEEE 802.3aq Type 10GBASE-LRM)

Additional ports and slots

1 RJ-45 serial console port

1 RJ-45 out-of-band management port

Power supplies

2 power supply slots 1 minimum power supply required includes: 1 x JG527A (HPE X351 300W 100-240VAC to 12VDC Power Supply)

Memory and processor (Processor)

Broadcom XLP432 Eight core @ 1.4 GHz, 4 GB flash, 8 GB DDR3 SDRAM

Mounting and enclosure

EIA-standard 19-inch Telco rack or equipment cabinet (hardware included)

Features

Default supported APs: 256

Maximum supported APs: 1536 (via the optional purchase of the 32 or 128 access point E-LTU)

Maximum supported clients and centralized throughput:

Maximum supported users via local portal authentication: 6000

Maximum supported users via local authentication (AAA): 3,000

Maximum supported configured SSIDs: 512

Maximum supported ACLs: 32,000

Supported MSM APs are automatically discovered, Comware firmware is loaded, and the APs can be fully managed. AP upgrades license rules for redundant HPE 870 Unified Wired-WLAN Appliance deployments.

• The primary HPE 870 Unified Wired-WLAN Appliance’s AP count must be increased using the optional HPE Unified Wired-WLAN 128 AP E-LTU (JG649AAE) or the HPE Unified Wired-WLAN 32 AP E-LTU (JG774AAE).
• The secondary HPE 870 Unified Wired-WLAN Appliance’s AP count can be increased as needed using the reduced-cost HPE Unified Wired-WLAN 128 AP Redundant E-LTU.

Power supplies are hot-swappable. When two power supplies are used, they must be the same type. An AC and a DC power supply must not be used together in the same appliance.

Dimensions (W x D x H)

17.32(w) x 18.9(d) x 3.47(h) in. (44 x 48 x 8.81 cm) (2U height)

Weight

29.32 lb (14.5 kg)

Maximum heat dissipation

887 BTU/hr (935.79 kJ/hr)

AC voltage

100 - 240 V ac

DC voltage

-48 to -60 V dc

Maximum power rating

260 W

Frequency

50/60 Hz

Operating temperature

0° to 45°C (32° to 113°F)

Operating relative humidity

5% to 95%, noncondensing

Nonoperating/storage temperature

-40°F to 158°F (-40°C to 70°C)

Nonoperating/storage relative humidity

5% to 95%, noncondensing

Altitude

up to 16,404 ft (5 km)

Safety

UL 60950-1; CAN/CSA 22.2 No. 60950-1; IEC 60950-1; EN 60950-1; FDA 21 CFR Subchapter J

Emissions

EN 55022 Class A; CISPR 22 Class A; ICES-003 Class A; AS/NZS CISPR 22 Class A; EN 61000-3-2; EN 61000-3-3; VCCI-3 CLASS A; VCCI-4 CLASS A; ETSI EN 300 386; FCC Part 15 (CFR 47) CLASS A

Immunity

EN

EN 55024, CISPR 24 & ETSI EN 300 386

Management

IMC—Intelligent Management Center; command-line interface; Web browser; SNMP Manager; Telnet; HTTPS; RMON1; FTP; IEEE 802.3 Ethernet MIB; Ethernet Interface MIB