Position:Home / Products / Switches / Huawei Switches / Huawei S3700 Series Switches
100+ Countries
6000+ Customers/Projects
CCIE, CISSP, JNCIE, NSE 7 AWS, Google Cloud Experts
Jim Huang
+86 136 9226 0946
Contact@huatenmax.com
The S3700-52P-SI-AC is a Huawei S3700 series switch, supporting forty-eight 10/100BASE-TX ports, two 1000BASE-X and two 100/1000BASE-X uplink interfaces. Huawei S3700 Enterprise Switches are designed for resilient 100 Mbit/s Fast Ethernet L3 switching in large data centers, or as core switches in small to medium-sized enterprise campus IT environments.
Figure 1 shows the appearance of Huawei S3700-52P-SI-AC switch.
Table 1 shows the Quick Specs.
Product Code |
|
Downlink Ports |
48 × 10/100BASE-TX ports |
Uplink Ports |
2 × 100/1000 Base-X SFP ports, and 2 × 1,000 Base-X SFP ports |
Forwarding Performance |
13.2 Mpps |
Switching Capacity |
64 Gbit/s |
Stacking |
Supported |
Stack Connection Mode |
Service port connection |
Power |
Built-in AC power module |
Heat Dissipation |
Intelligent heat dissipation |
Installation mode |
Rack mounting, desk mounting |
300-mm deep cabinet |
Not supported |
Dimensions (W x D x H) |
44.2 cm x 22 cm x 4.36 cm |
Weight (Kg) |
4.1 Kg |
Figure 2 shows the front panel of Huawei S3700-52P-SI-AC switch.
Note:
① |
Forty-eight 10/100BASE-X Ethernet optical interfaces |
③ |
Two 100/1000BASE-X Ethernet optical interfaces |
② |
Two 1000BASE-X Ethernet optical interfaces |
④ |
One console interface |
Figure 3 shows the back panel of Huawei S3700-52P-SI-AC switch.
Note:
① |
AC jack |
② |
Switch |
③ |
Ground screw |
Table 2 shows the recommended optical transceivers.
Model |
Description |
FE-SFP Optical Transceiver |
|
Optical Transceiver,SFP,100M/155M,Multi-mode Module(1310nm,2km,LC) |
|
Optical Transceiver,eSFP,100M/155M,Single-mode Module(1310nm,15km,LC) |
|
Optical Transceiver, eSFP, FE, Single-mode Module(1310nm,40km,LC) |
|
GE-SFP Optical Transceiver |
|
Optical Transceiver, eSFP, GE, Multi-mode Module(850nm,0.55km,LC) |
|
Optical Transceiver, eSFP, GE, Single-mode Module(1310nm,10km,LC) |
|
Optical Transceiver, eSFP, GE, Single-mode Module(1310nm,40km,LC) |
|
Optical Transceiver, eSFP, GE, Single-mode Module(1550nm,40km,LC) |
Table 3 shows the comparison of Huawei S3700-52P-EI-48S-AC and S3700-52P-SI-AC.
Models |
||
Downlink Ports |
48 × 100 Base-FX SFP ports, |
48 × 10/100 BASE-TX ports |
Uplink Ports |
2 × 100/1,000 Base-X SFP ports, and 2 × 1,000 Base-X SFP ports |
2 × 100/1000 Base-X SFP ports and 2 × SFP GE ports(1000Base-X) |
Power Supply |
AC |
AC |
Version |
Enhanced |
Standard |
Do you have any question about the Huawei S3700-52P-SI-AC switch?
Contact us now via Live Chat or Contact@huatenmax.com.
S3700-52P-SI-AC Specifications |
|
Manufacturer |
Huawei |
Manufacturer Part Number |
S3700-52P-SI-AC |
Form Factor |
Fixed, Stackable |
Switch Port |
48 FE ports, 2 GE Combo ports and 2 GE SFP ports |
Power Over Ethernet (PoE) |
Non-POE |
Performance |
|
Forwarding performance |
13.2 Mpps |
MAC address table |
IEEE 802.1d compliance |
16 K MAC address entries |
|
MAC address learning and aging |
|
Static, dynamic, and blackhole MAC address entries |
|
Packet filtering based on source MAC addresses |
|
VLAN |
4K VLANs |
Reliability |
RRPP ring topology and RRPP multi-instance |
Smart Link tree topology and Smart Link multi-instance, providing the millisecond-level protection switchover |
|
SEP |
|
STP, RSTP, and MSTP |
|
BPDU protection, root protection, and loop protection |
|
IP routing |
Static routing, RIPv1, RIPv2, and ECMP OSPF, IS-IS, and BGP |
IPv6 features |
Neighbor Discovery (ND) |
Path MTU (PMTU) |
|
IPv6 ping, IPv6 tracert, and IPv6 Telnet |
|
ACLs based on the source IPv6 address, destination IPv6 address, Layer 4 ports, or protocol type |
|
MLD v1/v2 snooping |
|
6to4 tunnel, ISATAP tunnel, and manually configured tunnel |
|
Multicast |
IGMP v1/v2/v3 snooping and IGMP fast leave |
Multicast forwarding in a VLAN and multicast replication between VLANs |
|
Multicast load balancing among member ports of a trunk |
|
Controllable multicast |
|
Port-based multicast traffic statistics |
|
QoS/ACL |
Rate limiting on packets sent and received by an interface |
Packet redirection |
|
Port-based traffic policing and two-rate three-color CAR |
|
Eight queues on each port |
|
WRR, DRR, SP, WRR+SP, and DRR+SP queue scheduling algorithms |
|
Re-marking of the 802.1p priority and DSCP priority |
|
Packet filtering at Layers 2 through 4, filtering out invalid frames based on the source MAC address, destination |
|
MAC address, source IP address, destination IP address, port number, protocol type, and VLAN ID |
|
Rate limiting in each queue and traffic shaping on ports |
|
Security |
User privilege management and password protection |
DoS attack defense, ARP attack defense, and ICMP attack defense |
|
Binding of the IP address, MAC address, interface, and VLAN |
|
Port isolation, port security, and sticky MAC |
|
Blackhole MAC address entries |
|
Limit on the number of learned MAC addresses |
|
802.1x authentication and limit on the number of users on an interface |
|
AAA authentication, RADIUS authentication, HWTACACS authentication, and NAC |
|
SSH v2.0 |
|
Hypertext Transfer Protocol Secure (HTTPS) |
|
CPU defense |
|
Blacklist and whitelist |
|
Management |
|
Power Supply Specifications |
|
Power Device |
Power supply - Non-PoE |
Voltage Required |
AC 120/240 V ( 50/60 Hz ) |
Dimensions / Weight / Miscellaneous |
|
Width |
44.2cm |
Depth |
43.6cm |
Height |
22.0cm |
Weight |
3kg |
System Software |
|
Software Version |
Standard Version |
Manufacturer Warranty |
|
Service & Support |
1 year warranty |