Position:Home / Products / Switches / Huawei Switches / Huawei S5700 Series Switches
100+ Countries
6000+ Customers/Projects
CCIE, CISSP, JNCIE, NSE 7 AWS, Google Cloud Experts
Jim Huang
+86 136 9226 0946
Contact@huatenmax.com
The S5700-52C-EI-AC gigabit enterprise switch is next-generation energy-saving switch developed by Huawei to meet the demand for high-bandwidth access and Ethernet multi-service aggregation. With 48 GE ports and 2 extended slots, it provides a large switching capacity and high-density GE ports to implement 10 Gbit/s upstream transmissions, widely used in various application scenarios like enterprise park access, convergence, gigabit access of data center application scenarios. It also has the card slot to offer diversified choices to customers, satisfying different demands of them. The S5700-52C-EI-AC is easy to install and maintain, reducing workloads for network planning, construction, and maintenance, then it uses advanced reliability, security, and energy conservation technology to help enterprise customers build a next-generation IT network.
Figure 1 shows the appearance of Huawei S5700-52C-EI-AC.
Table 1 shows the Quick Specs.
Product Code |
|
Fixed Ports |
48 x 10/100/1,000 Base-T |
Extended Slots |
2 extended slots |
Memory (RAM) |
256 MB |
Flash |
32MB |
MAC Address Table Size Forwarding Performance |
32K MAC |
Subcards Supported |
4 x 1,000 Base-X SFP subcard 2 x 10 GE SFP+ subcard 4 x 10 GE SFP+ subcard |
Forwarding Performance |
132 Mpps |
Switching Capacity |
256 Gbit/s |
Power Supply |
Double hot-swappable AC/DC power supplies |
Voltage Required |
AC: Rated voltage range: 100V to 240V AC, 50/60 Hz Maximum voltage range: 90V to 264V AC, 50/60 Hz DC: Rated voltage range: –48V to –60V, DC Maximum voltage range: –36V to –72V, DC |
Power Consumption Operational |
< 88W |
Dimensions (W x D x H) |
442 mm x 420 mm x 43.6 mm |
Weight |
7.3 kg |
Figure 2 shows the front panel of Huawei S5700-52C-EI-AC.
Note:
① |
Forty-eight 10/100/1000BASE-T ports |
② |
Front card slot |
③ |
ETH management port |
④ |
One console port |
* The front card slot is equipped with the card module, but the card module should be purchased separately.
Figure 3 shows the back panel of Huawei S5700-52C-EI-AC.
Note:
① |
ESD jack |
② |
Rear card slot |
③ |
Fan slot |
④ |
Power module slot 2 |
⑤ |
Power module slot 1 |
|
|
*Ventilating fan, cards and power modules have been installed in the diagram, but they should be purchased alone.
Table 2 shows the recommended optical modules.
|
Model |
Description |
GE-SFP Optical Transceiver |
Electrical Transceiver, SFP, GE, Electrical Interface Module(100m,RJ45) |
|
Optical Transceiver, eSFP, GE, Multi-mode Module(850nm,0.55km,LC) |
||
Optical Transceiver, eSFP, GE, Single-mode Module(1310nm,10km,LC) |
||
Optical Transceiver, eSFP, GE, Sngle-mode Module(1310nm,40km,LC) |
||
Optical Transceiver, eSFP, GE, Single-mode Module(1550nm,40km,LC) |
||
10G-SFP+ Optical Transceiver |
10GBase-USR Optical Transceiver,SFP+,10G,Multi-mode Module(850nm,0.1km,LC) |
|
Optical Transceiver,SFP+,10G,Multi-mode Module(850nm,0.3km,LC) |
||
Optical Transceiver,SFP+,10G,Single-mode Module(1310nm,10km,LC) |
Table 3 shows the comparison of Huawei S5700-52C-EI, 5700-52C-EI-AC and S5700-52C-PWR-EI.
Models |
|||
Fixed Ports |
48 x 10/100/1,000 Base-T |
48 x 10/100/1,000 Base-T |
48 x 10/100/1,000 Base-T |
Extended Slots |
2 extended slots, one for an uplink subcard and the other for a stack card |
2 extended slots, one for an uplink subcard and the other for a stack card |
2 extended slots, one for an uplink subcard and the other for a stack card |
Power Supply |
Double hot-swappable AC/DC |
Double hot-swappable AC/DC |
Double hot-swappable AC , PoE+ |
Forwarding Performance |
132 Mpps |
132 Mpps |
132 Mpps |
Switching Capacity |
256 Gbit/s |
256 Gbit/s |
256 Gbit/s |
Power Consumption |
< 88W |
< 88W |
< 930W (PoE: 740W) |
Huawei S5700 Series Enterprise Switches provides LI (Lite), SI (Standard), EI (Enhanced) and HI (Hyper) models for users. There are some differences among these four versions.
Click this PDF to know more.
Comparison of Huawei S5700-LI, SI, EI and HI Series Switches.pdf
Do you have any question about the Huawei S5700-52C-EI-AC switch?
Contact us now via Live Chat or Contact@huatenmax.com.
S5700-52C-EI-AC Specification |
|
MAC address table |
IEEE 802.1d compliance MAC address learning and aging Static, dynamic, and blackhole MAC address entries Packet filtering based on source MAC addresses MAC address entries: |
VLAN |
4K VLANs Guest VLAN and voice VLAN GVRP MUX VLAN VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports 1:1 and N:1 VLAN Mapping SuperVLAN(supported by the S5700-SI/S5700-EI/S5700-HI series) |
Ring protection |
RRPP ring topology and RRPP multi-instance Smart Link tree topology and Smart Link multi-instance, providing the millisecond-level protection switchover SEP ERPS(G.8032)(supported by the S5700-LI/S5700-SI/S5700-EI/S5700-HI series) STP, RSTP, and MSTP BPDU protection, root protection, and loop protection BPDU Tunnel |
Reliability |
Ethernet OAM (IEEE 802.3ah and 802.1ag) ITU-Y.1731 DLDP LACP E-Trunk(supported by the S5700-SI/S5700-EI/S5700-HI series) BFD for OSPF, BFD for IS-IS, BFD for VRRP, and BFD for PIM (supported by the S5700-EI/S5700-HI series) |
MPLS features |
MPLS L3VPN MPLS L2VPN(VPWS/VPLS) MPLS-TE MPLS QoS Notes: supported by S5710-EI, S5700-HI and S5710-HI |
IP routing |
Static routing RIPv1, RIPv2 and RIPng,ECMP(supported by the S5700-SI/S5700-EI/S5700-HI series) OSPF, OSPFv3, IS-IS, IS-ISv6, BGP and BGP4+ (supported by the S5700-EI/S5700-HI series) |
IPv6 features |
Neighbor Discovery (ND) Path MTU (PMTU) IPv6 ping, IPv6 tracert, and IPv6 Telnet ACLs based on the source IPv6 address, destination IPv6 address, Layer 4 ports, or protocol type MLD v1/v2 snooping 6to4 tunnel, ISATAP tunnel, and manually configured tunnel(supported by the S5700-SI/S5700-EI/S5700-HI series) |
Multicast |
IGMP v1/v2/v3 snooping and IGMP fast leave Multicast forwarding in a VLAN and multicast replication between VLANs Multicast load balancing among member ports of a trunk Controllable multicast Port-based multicast traffic statistics IGMP v1/v2/v3, PIM-SM, PIM-DM, PIM-SSM, MSDP (supported by the S5700-EI/S5700-HI series) |
QoS/ACL |
Rate limiting on packets sent and received by an interface Packet redirection Port-based traffic policing and two-rate three-color CAR Eight queues on each port WRR, DRR, SP, WRR+SP, and DRR+SP queue scheduling algorithms WRED (supported by the S5710-EI and S5700-HI) Re-marking of the 802.1p priority and DSCP priority Packet filtering at Layers 2 through 4, filtering out invalid frames based on the source MAC address, destination MAC address, source IP address, destination IP address, TCP/UDP port number, protocol type, and VLAN ID Rate limiting in each queue and traffic shaping on ports |
Security |
User privilege management and password protection DoS attack defense, ARP attack defense, and ICMP attack defense Binding of the IP address, MAC address, interface, and VLAN Port isolation, port security, and sticky MAC MFF Blackhole MAC address entries Limit on the number of learned MAC addresses 802.1x authentication and limit on the number of users on an interface AAA authentication, RADIUS authentication, HWTACACS authentication, and NAC SSH v2.0 Hypertext Transfer Protocol Secure (HTTPS) CPU defense Blacklist and whitelist |
Access Security |
DHCP Relay, DHCP Server, DHCP Snooping, DHCP Security |
Management and maintenance |
Virtual cable test Port mirroring and RSPAN (remote port mirroring) Remote configuration and maintenance using Telnet SNMP v1/v2c/v3 RMON Web NMS HGMP System logs and alarms of different levels 802.3az EEE (supported by the S5700(S)-LI, S5710-EI, S5700-HI and S5710-HI) Dying gasp (supported by the S5700-HI, S5710-HI and S5700(S)-LI(except battery LAN switches) NetStream (supported by the S5710-EI, S5700-HI and S5710-HI) sFlow(supported by the S5700(S)-LI/S5700-EI/S5700-HI series) |
Interoperability |
Supports VBST (Compatible with PVST/PVST+/RPVST) Supports LNP (Similar to DTP) Supports VCMP (Similar to VTP) |
Operating environment |
Operating temperature: 0℃–50℃ Relative humidity: 10%–90% (non-condensing) |
Input voltage |
AC: -Rated voltage range: 100 V to 240 V AC, 50/60 Hz -Maximum voltage range: 90 V to 264 V AC, 47/63 Hz DC: -Rated voltage range: –48 V to –60 V, DC -Maximum voltage range: –36 V to –72 V DC Note: PoE-support switches do not use DC power supplies. |