Position:Home / Products / Switches / Huawei Switches / Huawei S5700 Series Switches
100+ Countries
6000+ Customers/Projects
CCIE, CISSP, JNCIE, NSE 7 AWS, Google Cloud Experts
Jim Huang
+86 136 9226 0946
Contact@huatenmax.com
Huawei S5700-28C-PWR-EI-AC is one of the S5700 Series Switches. S5700 Series Switches provide highly scalable gigabit access for terminals in enterprise campus networks; also ideal for resilient server support and aggregation in large-scale data centers.
Figure 1 shows the appearance of S5700-28C-PWR-EI-AC.
Table 1 shows the Quick Specs.
Product Code |
|
Fixed Interfaces |
24 x 10/100/1,000 Base-T |
Extended Slots |
two extended slots, one for an uplink sub-card and the other for a stack card |
Subcards supported |
4 x 1,000 Base-X SFP subcard, 2 x 10 GE SFP+ subcard, and 4 x 10 GE SFP+ subcard |
Power Supply |
Double hot-swappable AC power supplies |
Forwarding Performance |
96 Mpps |
Switching Capacity |
256 Gbit/s |
Memory (RAM) |
256 MB |
Flash |
32 MB |
RPS |
Not supported |
PoE |
Supported |
power consumption |
< 842W (PoE: 740W) |
Dimensions (W x D x H) |
442 mm x 420 mm x 43.6 mm |
Weight |
Empty: ≤ 5 kg (11.02 lb) Fully loaded: ≤ 8.5 kg (18.74 lb) |
Figure 2 shows the front panel of S5700-28C-PWR-EI-AC.
Note:
① |
Twenty-four PoE+ 10/100/1000BASE-T ports |
② |
One console port |
③ |
ETH management port |
④ |
Front card slot |
Figure 3 shows the back panel of S5700-28C-PWR-EI-AC.
Note:
① |
ESD jack |
② |
Rear card slot |
③ |
Fan slot |
④ |
Power module slot 2 |
⑤ |
Power module slot 1 |
Table 2 shows the recommended elements for the S5700-28C-PWR-EI-AC.
GE-SFP Optical Transceiver |
|
Optical Transceiver, eSFP, GE, Multi-mode Module(850nm, 0.55km, LC) |
|
Optical Transceiver, eSFP, GE, Single-mode Module(1310nm, 10km, LC) |
|
Optical Transceiver, eSFP, GE, Single-mode Module(1310nm, 40km, LC) |
|
Optical Transceiver, eSFP, GE, Single-mode Module(1550nm, 40km, LC) |
|
10G-SFP+ Optical Transceiver |
|
10GBase-USR Optical Transceiver, SFP+, 10G, Multi-mode Module(850nm, 0.1km, LC) |
|
Optical Transceiver, SFP+, 10G, Multi-mode Module(850nm, 0.3km, LC) |
|
Optical Transceiver, SFP+, 10G, Single-mode Module(1310nm, 10km, LC) |
|
GE Copper Transceiver |
|
Electrical Transceiver, SFP, GE, Electrical Interface Module(100m, RJ45) |
|
10GE Interface Card |
|
2 10 Gig SFP+ interface card(used in S5700SI and S5700EI series |
Table 3 shows the comparison of S5700-28C-PWR-EI-AC and S5700-52C-EI.
Product Code |
||
Fixed Interfaces |
24 x 10/100/1,000 Base-T |
48 x 10/100/1,000 Base-T ports |
Extended Slots |
two extended slots, one for an uplink sub-card and the other for a stack card |
two extended slots, one for an uplink sub-card and the other for a stack card |
Subcards supported |
4 x 1,000 Base-X SFP subcard, 2 x 10 GE SFP+ subcard, and 4 x 10 GE SFP+ subcard |
4 x 1,000 Base-X SFP subcard, 2 x 10 GE SFP+ subcard, and 4 x 10 GE SFP+ subcard |
Power Supply |
Double hot-swappable AC power supplies |
Double hot-swappable AC/DC power supplies |
Forwarding Performance |
96 Mpps |
132 Mpps |
Switching Capacity |
256 Gbit/s |
256 Gbit/s |
Memory (RAM) |
256 MB |
256 MB |
Flash |
32 MB |
32 MB |
RPS |
Not supported |
Not supported |
PoE |
Supported |
Not supported |
power consumption |
< 842W(PoE: 740W) |
< 88W |
Do you have any question about the S5700-28C-PWR-EI-AC?
Contact us now via Live Chat or Contact@huatenmax.com.
S5700-28C-PWR-EI-AC Specifications |
|
Switching Capacity |
256 Gbit/s |
Forwarding Performance |
96 Mpps |
Fixed Ports |
24 x 10/100/1,000 Base-T ports |
Extended Slots |
S5700C provides two extended slots, one for an uplink subcard and the other for a stack card. |
MAC Address Table |
IEEE 802.1d compliance 32K MAC MAC address learning and aging Static, dynamic, and blackhole MAC address entries Packet filtering based on source MAC addresses |
VLAN |
4K VLANs Guest VLAN and voice VLAN GVRP MUX VLAN VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports 1:1 and N:1 VLAN Mapping |
Reliability |
RRPP ring topology and RRPP multi-instance Smart Link tree topology and Smart Link multi-instance, providing the millisecond-level protection switchover SEP ERPS (G.8032) BFD for OSPF, BFD for IS-IS, BFD for VRRP, and BFD for PIM STP (IEEE 802.1d), RSTP (IEEE 802.1w), and MSTP (IEEE 802.1s) BPDU protection, root protection, and loop protection E-Trunk |
IP Routing |
Static routing, RIPv1/v2, RIGng, OSPF, OSPFv3, IS-IS, IS-ISv6, BGP, BGP4+, and ECMP |
IPv6 Features |
Neighbor Discovery (ND) Path MTU (PMTU) IPv6 ping, IPv6 tracert, and IPv6 Telnet ACLs based on the source IPv6 address, destination IPv6 address, Layer 4 ports, or protocol type MLD v1/v2 snooping IPv4 and IPv6 dual stack 6to4 tunnel, ISATAP tunnel, and manually configured tunnel |
Multicast |
IGMP v1/v2/v3 snooping and IGMP fast leave Multicast forwarding in a VLAN and multicast replication between VLANs Multicast load balancing among member ports of a trunk Controllable multicast Port-based multicast traffic statistics IGMP v1/v2/v3, PIM-SM, PIM-DM, and PIM-SSM MSDP |
QoS/ACL |
Rate limiting on packets sent and received by an interface Packet redirection Port-based traffic policing and two-rate three-color CAR Eight queues on each port WRR, DRR, PQ, WRR + PQ, and DRR + PQ queue scheduling algorithms WRED (supported by the S5710-EI) Re-marking of the 802.1p priority and DSCP priority Packet filtering at Layer 2 to Layer 4, filtering out invalid frames based on the source MAC address, destination MAC address, source IP address, destination IP address, TCP/UDP port number, protocol type, and VLAN ID Rate limiting in each queue and traffic shaping on ports |
Security |
User privilege management and password protection DoS attack defense, ARP attack defense, and ICMP attack defense Binding of the IP address, MAC address, interface, and VLAN Port isolation, port security, and sticky MAC Blackhole MAC address entries Limit on the number of learned MAC addresses 802.1x authentication and limit on the number of users on an interface AAA authentication, RADIUS authentication, HWTACACS+ authentication, and NAC SSH v2.0 Hypertext Transfer Protocol Secure (HTTPS) CPU defense Blacklist and whitelist |
Management and Maintenance |
iStack MAC Forced Forwarding (MFF) Virtual cable test SNMP v1/v2c/v3 RMON Web NMS System logs and alarms of different levels NetStream (supported by S5710-EI) sFlow |
Interoperability |
Supports VBST (Compatible with PVST/PVST+/RPVST) |
Supports LNP (Similar to DTP) |
|
Supports VCMP (Similar to VTP) |
|
Operating Environment |
Operating temperature: 0°C to 50°C Relative humidity: 5% to 95% (non-condensing) |
Input Voltage |
-Rated voltage range: 100V to 240V AC, 50 Hz/60 Hz |
Dimensions (W x D x H) |
442 mm x 420 mm x 43.6 mm |
Power Consumption |
< 842W (PoE: 740W) |